61
Custom-white-balance function allows the camera to be
calibrated to a specific lighting condition. Three setting
can be stored in the camera.
With the white balance dial in the custom position, press
the white-balance button to open the setting screen.
Custom White Balance
If the set option was selected, the red custom setup
indicator is displayed on the monitor.
Fill the spot metering area with a white or neutral object;
the object does not need to be in focus. Press the
shutter-release button to calibrate the camera.
On the register-selection screen use the control dials or
left/right keys of the controller to select the custom
white-balance register in which to store the setting; any
previous setting is replaced. Press the central button of
the controller to complete the operation.
Custom white balance
:select :enter
The control dials and the left/right controller keys select
a previous custom setting stored on register 1, 2, or 3,
or the set option to calibrate the camera.
Press the central controller button to apply a custom
register setting or continue the calibration routine.
Select register
:select :enter
Custom registers
(Continued on the next page.)
