Specifications and accessories are based on the latest information available at the time of printing and are subject to change without notice.
SELF-TIMER
The self-timer delays release of the shutter for approximately ten seconds.
• When the self-timer is selected, the flash will fire every time a picture is taken.
• The print format is set to H when the self-timer is selected.
1. Mount the camera on the handy tripod (not
included) and place on a level surface.
2. Set the command switch to .
• will appear in the data panel.
4. Press the shutter-release button all the
way down to take the picture.
• will blink in the data panel during countdown.
3. Frame your subject(s) inside the H print
image frame.
LAB SERVICES
Certified photofinishers will provide the following services when you take your film in
for processing.
1. CHP - Print Format
Your film will be printed according to the format set when the picture was taken.
2. Film is returned in the cassette.
Film will be returned in its original cassette and the VEI set to to prevent
accidental loading.
3. Index Print
An index print with a numbered image of each frame is included with your
returned order.
REPRINTS
Images are always captured in the H Print format. However, any of the three formats
can be selected when ordering reprints.
CARING FOR YOUR CAMERA
Cleaning
• If the camera body is dirty, wipe it clean with a soft, dry cloth.
• To clean the lens cover glass, brush away any dust or sand. If necessary, moisten a
lens tissue with lens cleaning fluid and gently wipe the cover glass in a circular motion.
• Remove foreign matter from the gaskets and joining surfaces with a clean, dry cloth
when the film and battery chambers are opened.
• Never use alcohol or solvents to clean the camera.
Before Important Events
• Check camera operation carefully, or take test photographs.
• Minolta is not responsible for any loss that may occur due to an equipment
malfunction.
Storage
When storing the camera for extended periods,
• Store the camera in a cool, dry, well-ventilated area away from dust and chemicals.
For longer periods, place the camera in an airtight container with a silica gel drying
agent.
• Before using after prolonged storage, check the camera’s operation to make sure it’s
functioning properly.
Questions and Service
• If you have questions about your camera, contact your local camera dealer or write to
the Minolta distributor in your area.
• Before shipping your camera for repair, contact an authorized Minolta Service Facility
for details.
TECHNICAL DETAILS
Camera Type: Waterproof IX240 Lens Shutter Type
Lens: 27mm f/6.4 (approx. equivalent to 34 mm in
the 35 mm format)
Viewfinder Magnification: 0.54X
Focusing: Fixed 1.0m - ∞ (3.3 ft. - ∞)
Exposure: Programmed AE
Metering Range (ISO 200): EV 11 - 15
Flash Range (ISO 200): 1.0 ~ 3.0m (3.3 ~ 9.8 ft.)
Battery: One CR2 3V lithium battery
Battery performance: Approximately twenty, 25-exposure rolls
(Based on Minolta’s standard test method
with flash on for 50% of the exposures.)
Waterproof: IPX8 – waterproof to a depth of
approx. 5m (16 ft.)
Dimensions: 134.5 x 78 x 48mm (5.3 x 3.1 x 1.9 in.)
Weight (w/o battery): 240g (8.46 oz.)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. Changes or modifications not approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Take your film to a Certified
Advanced Photo System
Photofinishing Service to
receive the best possible prints.
