Bedienungsanleitung Mio Cyclo 105 (Seite 5 von 22) (Englisch)

512352

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

CAUTION: For optimal performance of the lithium battery, note the following:

• Do not charge the battery where the temperature is high (e.g. in direct sunlight).

The battery will stop charging when the ambient temperature is less than -10ºC (14ºF)

or more than 60ºC (140ºF).

• Recharge the battery when it is nearly discharged. When recharging, make sure that

the battery is fully charged. Doing so can extend the battery life.

• If you will not use the product for a long period of time (over one month) or find the

discharge/recharge time has been shortened, be sure to fully discharge the battery

first before recharging it. You are also advised to fully discharge and recharge the

battery once every 1~2 months.

• Failure to follow the battery usage instructions could cause damage to your device,

battery and even bodily injury or property damage and will void the warranty.

Performing the initial start-up

1. Mount the device and accessories on to your bike. For more information, see

the “Installing the device” section.

2. Press and hold the POWER button for 2 seconds to turn your device on.

2 sec

3. Follow the prompts to personalise your device, including:

• Select your preferred language

• select the coordination format: degree or degree/minute/second

• select the units format: imperial or metric

• set up date and time format, including the correct time zone and daylight

saving function

• set up your proﬁle, including gender, birthday, weight, height, and

workout level

• select your bike type (race, city, or mountain) and complete the bike’s

data (weight and wheel size*)

* For selected models only.

Tip: You will only have to do this the first time you use your Mio. You can change these

settings from the SETTINGS menu while using the device.

4. Once your device is turned on, it will search for satellite signals

automatically. This may take several seconds depending on the location.

When GPS is ﬁxed, the GPS signal icon ( ) on the screen indicates the

GPS status.

5. Depending on your device model, you will need to scan and pair the heart

rate monitor and cadence/speed sensor with the device. After installing the

cadence/speed sensor and heart rate monitor, enable the device to scan

them from Main menu > SETTINGS > ACCESSORIES > SENSORS.

Connecting your device to the computer

1. Turn on the computer.

2. Turn on your device. Connect the mini-USB end of the USB cable to the back

of your device and the other end to a USB port on your computer.

3. When prompted, select the desired connection type from the CONNECT TO

PC message window:

• YES: Your device will be connected to the computer so you can transfer

your training data to the computer and upgrade your device (when

update is available) via Mio Share.

Tip: For more information about using Mio Share, see the "Managing data on the

device" section.

• NO: You will be able to continue using your device with the battery in

charging mode via the computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mio Cyclo 105 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mio Cyclo 105

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info