Bedienungsanleitung Mitsubishi FL7000U (Seite 47 von 48) (Englisch)

493619

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

EN-47

1 R(RED)/P

2 G(GREEN)/Y

3 B(BLUE)/P

4 GND

5 GND

6 GND

7 GND

8 GND

9 DDC 5V

10 GND

11 GND

12 DDC Data

13 HD/CS

14 VD

15 DDC Clock

2 TXD IN

3 RXD OUT

5 GND

SERIAL (D-SUB 9-pin)

Pin No. Name I/O

COMPUTER/COMPONENT VIDEO IN 2

(Mini D-SUB 15-pin)

Pin No. Spec.

COMPUTER/COMPONENT VIDEO

DVI-D (HDCP)(DVI-D 24-pin)

Pin No. Spec. Pin No. Spec.

1 TMDS DATA 2- 13

2 TMDS DATA 2+

14 +5V Power

TMDS DATA 2 Shield

15 Ground (for +5V)

16 Hot Plug Detect

17 TMDS DATA 0-

6 DDC Clock 18 TMDS DATA 0+

7 DDC Data 19

TMDS DATA 0 Shield

9 TMDS DATA 1- 21

10 TMDS DATA 1+ 22

TMDS Clock Shield

TMDS DATA 1 Shield

23 TMDS Clock+

24 TMDS Clock-

1724

Connectors

434

371

131.5

207

103

434

Dimension drawings (unit: mm)

Speciﬁ cations (continued)

Speciﬁ cation of RGB signals in each computer

mode of the projector (continued)

Important:

• Some computers aren’t compatible with the projector.

• The projector’s maximum resolution is 1920 x 1080 pix-

els. It may not display images of higher resolutions than

1920 x 1080 correctly.

• Images with SYNC on G (Green) signal may jitter.

• Images with SYNC on G (Green) signal may be tinged

with green.

• If the resolution and frequency of your computer aren’t

shown on the table, ﬁ nd the compatible resolution and

frequency by changing the resolution of your computer.

• TV60 and TV50 are equivalent to 480i and 576i

respectively. When these signals are supplied to the

VIDEO IN or S-VIDEO IN terminal, the signal mode is

indicated as TV60 or TV50. When they are supplied to

the COMPUTER/COMPONENT VIDEO IN terminals, the

signal mode is indicated as 480i or 576i.

• This projector doesn’t support 480p signals from video

devices having 4 lines (R, G, B, CS*) or having 5 lines (R,

G, B, H, V).

* : Composite Sync

• When a certain signal such as SXGA85, SXGA85b

and UXGA60 is input, the number of displayed colors

may decrease depending on the setting of ASPECT in

the FEATURE menu. Change the signal format of the

computer, if necessary.

REAL mode

When moire patterns or lines of uneven thickness appear

on the projected image, these symptoms may be improved

by displaying it in its original image size (REAL mode). To

display the image in the REAL mode, set ASPECT of the

FEATURE menu to REAL. (See page 23 for menu setting.)

• In the REAL mode, you cannot change the magniﬁ cation

factor and magniﬁ cation range.

• Images of which resolution is larger than the panel resolu-

tion cannot be displayed in the REAL mode.

• In the REAL mode, images are black-framed when the

image resolution is lower than the panel resolution.

443

207 434

434

131.5

103

Without terminal cover

With terminal cover

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi FL7000U Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info