Bedienungsanleitung Mitsubishi HC7900DW (Seite 5 von 55) (Englisch)

549873

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

EN-5

WARNING:

Unplug immediately if there is something wrong with

your projector.

Do not operate if smoke, strange noise or odor comes out

of your projector. It might cause ﬁre or electric shock. In this

case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An

inadvertent contact may result in an electric shock.

Except as speciﬁcally explained in the User Manual do

not attempt to service this product by yourself. Please

contact your dealer when you want to ﬁx, adjust or

inspect the projector.

Do not modify this equipment.

It can lead to ﬁre or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged,

unplug the projector and contact your dealer for inspection.

It may lead to ﬁre if you keep using the damaged projector.

Be sure to unplug the power cord from the wall outlet

if the projector is fractured or deformed.

Otherwise, it may result in ﬁre or electric shock. Ask your

dealer for repair.

Do not face the projector lens to the sun.

It can lead to ﬁre.

Use correct voltage.

If you use incorrect voltage, it can lead to ﬁre.

Do not place the projector on uneven surface.

Place the projection on a leveled and stable surface only.

Please do not place equipment on unstable surfaces.

Do not look into the lens when it is operating.

It may hurt your eyes. Never let children look into the lens

when it is on.

Do not put any objects immediately in front of the lens

while the lamp is on.

The lens and the objects get hot and can cause ﬁre or

breakdown.

Do not unplug the power cord during operation.

It can lead to lamp breakage, ﬁre, electric shock or other

trouble. It is best to wait for the fan to turn off before

turning the main power off.

Do not touch the exhaust vents and bottom plate,

which become hot.

Do not touch them or put other equipment in front of the

exhaust vents. The exhaust vents and bottom plate, when

heated, may cause injury or damage to other equipment.

Also, do not set the projector on the desk which is easily

affected by heat.

Do not look into the exhaust vents when projector is

operating.

Heat, dust, etc. may blow out of them and hurt your eyes.

Do not block the intake and exhaust vents.

If they are blocked, heat may be generated inside the

projector, causing deterioration in the projector quality and ﬁre.

Do not use ﬂammable solvents (benzene, thinner, etc.)

and ﬂammable aerosols near the projector.

Flammable substances may ignite causing ﬁre or

breakdown because the temperature inside the projector

rises very high while the lamp is illuminating.

Do not use the projector with condensation on it.

It can lead to breakdown or other failure.

Place of installation

For safety’s sake, refrain from setting the projector at any

place subjected to high temperature and high humidity.

Please maintain an operating temperature, humidity, and

altitude as speciﬁed below.

• Operatingtemperature:between+41°F(+5°C)and

+95°F(+35°C)

• Operatinghumidity:between30%and90%

• Neverputanyheat-producingdeviceunderthe

projector so that the projector does not overheat.

• Donotattachtheprojectortoaplacethatisunstable

or subjected to vibration.

• Donotinstalltheprojectornearanyequipmentthat

produces a strong magnetic ﬁeld. Also refrain from

installing near the projector any cable carrying a large

current.

• Placetheprojectoronasolid,vibrationfreesurface;

otherwise it may fall, causing serious injury to a child

or adult, and serious damage to the product.

• Donotstandtheprojector;itmayfall,causingserious

injury and damage to the projector.

• Slantingtheprojectormorethan±10°(rightandleft)or

±15°(frontandrear)maycausetroubleorexplosionof

the lamp.

• Donotplacetheprojectornearair-conditioningunit,

heater, or humidiﬁer to avoid hot or moist air to the

exhaust and ventilation hole of the projector.

• Donotplacetheprojectorinthefollowingplaces.

Otherwise, a short circuit, heat generation, or melting

of the power cord coating may occur, causing ﬁre,

electric shock, product failure, or deformation.

• Outdoorsornonair-conditionedplace

• Placewhereagassuchasahydrogensuldeis

generated (i.e. hot spring)

• Placewherethereistoomuchsaltsuchasnear

the coast

Do not place a container containing water or other

liquid on the projector.

If water spills on or enters the projector, it may result in

ﬁre or electric shock.

Do not put any object that is heavy or larger than the

outer frame on the projector.

Otherwise, the object may fall losing its balance and

cause injury.

Do not subject the projector to strong shocks or

vibrations. Do not handle the projector roughly.

The projector may be damaged, resulting in ﬁre or electric

shock.

Important safeguards (continued)

Mitsubishi HC7900DW Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info