Bedienungsanleitung Momon Vernuji (Seite 9 von 11) (Englisch, Italienisch)

769167

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

1716

upwards, select the required position and release the handle. The

backrest is equipped with a spring-loaded auto-lock mechanism that

does not require the handle to be lifted when lifting the backrest from

lying to sitting position.

9. Do not allow the child to stand on the seat as it may damage the sta-

bility of the stroller and cause the stroller to fall down.

10. Do not carry the pram holding the hood, upper edge of the backrest,

footrest or the element creating the pram version. Keep the handle tube

securely. Carrying the pram up or down the steps, placing the pram to

the bus, etc. should be carried out with the aid of another person. The

person holding the pram handle tube passes the obstacle ﬁrst while hol-

ding the pram handle tube, and the person holding the other end of the

pram should grasp the pram by a stable element such as a ﬁxed upright

of the frame. When carrying the pram downstairs the person who is hel-

ping comes down ﬁrst.

11. When the pram is not in use, the brake should always be engaged.

Use of the brake requires lowering the brake level and checking the ef-

fectiveness of the brake. Before moving the pram, ensure that the pram

wheels are not locked; moving the pram with locked wheels could cause

damage to locking elements.

12. When passing obstacles at of varying levels (e.g. high doorsteps),

bring both wheels closer together (of the same axle) simultaneously

pressing the handle tube down when passing the obstacle with front

wheels. When passing higher obstacles (e.g. access to curbs of a si-

dewalk), place the front wheels of the pram slightly above the level of the

obstacle surface simultaneously by pressing the handle tube down and

pulling it towards the body, move the rear wheel closer to the obstacle,

lower the front wheels and move the rear wheels over the obstacle by li-

fting the pram up. Any collision with hard objects or surfaces may dama-

ge (deform) elements connecting the frame or damage frame elements

causing a lack of proper alignment.

14. Keep the pram elements clean. Dirt on the frame should be removed

with a damp sponge and then wiped with a dry cotton cloth. Do not use

caustic, sharp, or hard agents for cleaning as these may be harmful to

the pram elements (discolouration, scratches, etc.). It is recommended

to use cleaning agents appropriate for a particular surface. In the case

of any dirt on the pram cover, remove it with the use of a damp sponge,

adding a delicate cleaning agent. Avoid over wetting the stroller seat,

bottom of the carry cot, and bottom of additional sleeping bag (pram

of changeable function) as this may cause deformation of stringer ring

elements.

15. To avoid weepings or smudges which may occur after rainfall, for

instance, secure the pram against over soaking by the use of rain cover

for the whole pram. It is recommended to protect the pram against the

effects of strong sunlight. The manufacturer cannot accept responsibili-

ty for deterioration to the pram cover, which result from failure to follow

these recommendations.

16. Before mounting and dismounting the wheels, lift the locking me-

chanism of the brake upwards (unblocked break). We recommend that

the pram axles be kept clean. Where prams are equipped with wheels

without bearings, pram axles should be kept lubricated with a thick agent

(cup grease, machine oil) to reduce friction on tube ends. In models

equipped with wheels with bearings, it is recommended to lubricate the

axles with a lubricating agent e.g. WD40. In the case of inﬂating wheels,

we recommend that the inner tube pressure be maintained at a constant

level not exceeding 0.6 at or of the value indicated on the wheel frame.

17. WARNING: Accessories or spare parts that the manufacturer or di-

stributor has not approved must not be used.

18. For chassis equipped with mounting holes for the car seat - all con-

nectors that the manufacturer or distributor has not approved must not

be used.

19. Adaptors for the Car Seat that the manufacturer or distributor has

not approved must not be used. WARNING: Check that the car seat atta-

chment devices are correctly engaged before use.

20. Do not use the combination of the car seat and chassis as a place for

the child to sleep for long periods of time. If your child wants to sleep,

always use the carry cot or cot/cot bed.

21. The manufacturer recommends ﬁtting the car seat in the opposite

direction to the direction of traveling (parent facing), it makes easier to

observe the child in the car seat.

ENEN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Momon Vernuji Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info