9
Dry ironing
To use your steam generator as a dry iron only,
follow steps 2, 3, 4 and 5 of ‘Using the Steam
Generator’ on page 7 and 8. You do not need to
put water in the water tank (13).
Auto shut-off
If
the steam trigger
(4) is not used for 10 minutes,
the product will automatically turn off for safety
and to save energy. When this happens, the auto
shut-off indicator (30) will flash.
To restart,
press the select button
(20) and wait
for the temperature to rise again.
NOTE: The appliance is not turned off completely
in auto shut-off mode. To switch the product off,
unplug the product from the mains outlet.
Steam function
During steaming, small amounts of water may be
ejected from the soleplate
(6)
. This is normal and
can be avoided by using the steam for short
amou
nts of time and only when the iron is at the
correct temperature (the temperature setting
indicator (22/23/24/25/31) on the control panel
stops flashing when ready).
Sudden jolts to the boiler unit can also cause
water droplets on the soleplate; therefore, do not
move the base unit (17) during ironing.
We recommend for first time ironing that you
iron over an old towel.
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, upholstery, etc.
Hold the iron
(5)
between 1cm and 2cm away
from the item and press the steam trigger
(4)
twice in quick succession for a longer boost of
steam. To turn the steam boost off, press the
steam trigger again.
WARNING: Do not use the vertical steam
feature on clothes that are being worn.
Features
The product requires an antiscale cartridge to
help reduce limescale and extend its life. The
antiscale indicator (29) will illuminate to prompt
you to replace the antiscale cartridge which is
located in the base unit (17) behind the water tank
(13). The antiscale indicator (29) will go out only
after the antiscale cartridge has been replaced.
Maintenance
