481988
4
Zoom out
Zoom in
Vorherige Seite
1/5
Nächste Seite
2
- Before using your new appliance
for the first time, you should wash
the blender jug in hot, soapy water.
Rinse and dry with care.
- Important notes :
- Position the selector (b) to the set-
ting " O " before placing the blen-
der jug on the motor unit.
- The appliance will only start if the
blender jug is correctly positioned on
the motor unit.
- Dampen the seal of the blade unit
(d3).
- Place the blade unit (d3) in the jug
(d2) and fix it in position by turning
until it locks (1).
- Position the blender jug (d) on the
motor unit (a) (2).
- Put all the ingredients into the jug
without going over the maximum level
(1,2 l). For a smoother mixture, put
the liquid ingredients in first and run
the blender for a moment before put-
ting in the solid ingredients.
- Place the lid (d1) on the jug and lock
it in position (3).To make locking
easier, dampen the integral seal on
the lid.The lid must always be in
place when the appliance is in opera-
tion.
- Plug in the appliance.
- Set the speed, using the selector (b).
-To stop the appliance, turn the selec-
tor (b) back to position " O ".
Getting started
Using the blender
Tips :
- Speed 1 : to start liquid preparations.
- Speed 2 : to blend preparations.
- Pulse : instant speed obtained by
successive movements of the selec-
tor (b) in the " Pulse " setting." Pulse
" position allows you to process hard
ingredients and to give a final touch
to your preparation.
- For liquid preparations, cover the bla-
des (d3) to avoid splashes in the
interior of the jug and to facilitate the
blending of the ingredients.
- For thick mixtures, you can always
stop the appliance during preparation
to push the ingredients back down
onto the blades.
- Do not use continuously for more
than 1 1/2 mns..
Ice Crushing
- Put some ice cubes into the jug.
- Push by impulse on the " Ice Crusher
" button.
- Unplug the appliance.
- The blender jug will go in the dish-
washer. Rinse and dry each part well.
- Clean the motor unit (a) using a
damp cloth.Dry with care.
- Never place the motor unit in water or
under running water.
- The plastic base of the glass jug (d2)
cannot be removed.
- Handle blades with great care. They
can cause injury.
- Over time the strong coloured natural
juices from food such as carrots and
beetroot may stain the plastic parts of
your appliance - this is normal.
- This parts may be cleaned by soa-
king them in mild bleach (non abrasi-
ve) straight after use.
Cleaning
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Moulinex Chicago wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info