Bedienungsanleitung Mpman BOOMBOX 30 USB (Seite 3 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch)

673979

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

SKIP MODE

1. During play or pause mode, press the SKIP+ button to go to the next track.

2. For playing MP3 files with folders, when the end of the folder is reached, press the

SKIP+ button will go to the first track of the next folder.

3. During play or pause mode, press the SKIP− button to go back to the beginning of

the track.

4. During play mode, press the SKIP− button twice will go back to the previous track.

5. For playing MP3 files with folders, when reaching the beginning of the folder, press

the SKIP− button will go to the last track of the previous folder.

REPEAT MODE

Press the REPEAT button to select different kinds of play mode with the following

sequence.

For Audio CDs : Repeat One  Repeat All  Normal

For MP3 Files : Repeat One  Repeat All  Repeat Folder  Normal

 Repeat One ( appear on the LCD display and blink continuously) – repeat the

track/file being played.

 Repeat All ( appear on the LCD display) – repeat all the tracks/files in the

entire storage media.

 Repeat Folder – ( and FOLDER appear on the LCD display) – Repeat all the

tracks/files in the entire folder.

PROGRAMMING

The programming should be done during STOP mode

1. Press the PROGRAM button, the LCD display will show P01 and flash.

2. Use the SKIP+ or SKIP− button to select the desired track.

3. Press the PROGRAM button again to store the selected track in the memory, the

LCD display will show P02 and flash continuously.

4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20

tracks in the memory.

5. Press the PLAY/PAUSE button to start playing the disc in the programmed order.

6. To stop playing, press the STOP button.

7. To cancel the programming list, press the STOP button and open the CD

compartment door or select a different function OFF/AUX or RADIO.

Remarks : For Programming the MP3 files with USB Port, FOLDER UP button and

FOLDER DN button are not function in PROGRAMMING mode.

- EN4 -

MP3/AUX IN CONNECTION

1. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into

the line-out jack or phones jack on your MP3 player and the other side to the aux-in

jack on the unit.

2. Turn on the unit and slide the FUNCTION switch to RADIO/AUX position.

3. Turn on your MP3 player and follow the playback instruction.

4. To stop this function, simply turned off your MP3 player.

Note:

Because of non-standardized format definition/production of MP3 format, playback

quality & performance are not guaranteed.

Manufacturer is not responsible for the playability of MP3 in any case due to recording

conditions such as PC performance, writing software, media ability and etc.

CARE AND MAINTENANCE

 Always turn off the unit after use.

 Keep the unit away from magnetic objects, water or heat sources.

 Use a clean soft cloth moistened with lukewarm water to clean the cabinet. Never

use chemical cleaners that could damage the finish of the unit.

 Never touch the CD pickup and lens. If fingerprints get on the pickup lens, clean it

gently with a commercial lens cleaner.

 Disconnect the unit from any power sources before cleaning.

 To remove a disc from its storage case, press down on the centre of the case and

lift the disc out, holding it carefully by the edges.

 Fingerprints and dust should be carefully wiped off the disc’s recorded surface with

a soft cloth. Unlike conventional records, compact discs have no grooves to collect

dust and microscopic debris so gently wiping with a soft cloth should remove most

particles. Wipe in a straight line from the inside to the outside of the disc. Small

dust particles and light stains will have absolutely no effect on reproduction quality.

 Never use chemicals such as record sprays, anti-static sprays, benzene or

thinners to clean compact discs. These chemicals can irreparably damage the

disc’s surface.

 Discs should be returned to their cases after use. This avoids serious scratches

that could cause the Laser pickup to skip.

 Do not expose discs to direct sunlight, high humidity, or high temperatures for

extended periods. Long exposure to high temperatures can warp the disc.

 Do not stick paper or write anything with a ballpoint pen on the label side of the

disc.

- EN5 -

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mpman BOOMBOX 30 USB Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info