Bedienungsanleitung Mr Handsfree Blue Vision II (Seite 9 von 12) (Englisch)

493841

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

GB - 6

Redialing the last dialed number

Press the Reject button (6) or the Reject button (15) on the remote control while no call is in progress. J You will hear a double beep

and the phone will dial the last dialed number.

ENDING A CALL

Press the Reject button (6) or the Reject button (15) on the remote control to end the call with your mobile phone.

ANSWERING A CALL

Press the Talk button (5) or the Talk button (14) on the remote control.

AUTOMATIC ANSWER

If the Automatic answer function is set on your phone, the phone automatically answers the incoming call after some rings.

REJECTING A CALL

Press the Reject button (6) or the Reject button (15) on the remote control.

SECOND INCOMING CALL

If you get a second call during a conversation, you will hear a beep tone and you have the following two options:

1. Press the Talk button (5) or the Talk button (14) on the remote control to receive the second call and put the current call on hold.

J You can press the Talk button (5) or the Talk button (14) on the remote control again to switch between the two calls.

2. Press the Reject button (6) or the Reject button (15) on the remote control to receive the second call and reject the current call.

Note:

Some phones don’t support this feature via Bluetooth

or require confirmation from the telephone menu.

ADJUSTING THE CARKIT SPEAKER VOLUME

When your phone and the carkit just paired, the volume is set in the middle level automatically. Press the Volume Up button (2 or 17)

to increase the volume level or the Volume Down button (3 or 18) to decrease the volume.

When the maximum or minimum level of the carkit’s speaker is reached, you will hear a loud beep tone.

PRIVATE CALL (SWITCHING CALLS BETWEEN CARKIT AND MOBILE PHONE)

To switch the call from the carkit to the mobile phone, press the Mute button (16) on the remote control. J You will hear a double beep

tone and the call will be transferred to your mobile phone. J To switch the current phone call from your mobile phone to the carkit press

the Mute button (16) again or select the corresponding item in the phone’s menu (depending on your mobile phone).

DTMF COMMANDS

If you need to dial a DTMF command during a call, use the digital keypad (20) on the remote control. J Press the Talk button (14) on

the remote control to send the DTMF command.

HANDSFREE / HEADSET MODE

Some phones require Bluetooth

operation in Headset mode.

To activate the Headset mode, switch off the Blue Vision II. J Press and hold the Talk button (5) and switch on the power. You will hear

a melody tone. J Disconnect your mobile phone and the Blue Vision II as described in the chapter “Disconnection”. J Restore the

Bluetooth

connection as described in the chapter “Connection”. J From now your Blue Vision II will work with your phone in Headset

mode. J To restore the Handsfree mode operation, you should repeat this procedure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mr Handsfree Blue Vision II Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mr Handsfree Blue Vision II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info