Mr . Safe P ortable Pock et LED Light See illustraon
1. USB Char8ging input
2. USB Charging output
3. SOS Light
4. Power & Dim bu on
5. LED Indicator
6. Handle
7. Epistar BP Surf ace 16 chip SMD LED
INTRODUCTION
Y our Mr . Safe Portable P ocke t LED Light is a portable 10W
work light with power bank funcon that provides light
and power wherev er it is needed.
It is a versale ligh t soluon for mulple applicaons:
- For jobs in and around the house, oce, war ehouse, etc…
- As an “ emergency light” (f .e: during camping trips,
power failure, while moving) with SOS ashing funcon
It also has a built-in 4000mAh power bank with a USB
output of 2.1A to charge y our devices on the go.
SAFETY INSTRUCTIONS
• Do not shine the LED directly into the ey es.
• Close super vision is necessary for when the pr oduct
is used near children. Do not allow the product t o be
used as a toy .
• When the product is not in use, stor e it in a cool place
to prolong your ba ery life. Ideally charge it 1-2 hours
befor e storing.
• Do not submerge the product in w ater , the product is
IP54 rainproof .
• The Portable P ocke t LED Light can be used outdoors,
but you should avoid extreme temperatures or heavy
rain as this could damage the ba ery .
• Do not cover the unit during use, make sure there is
sucient venlaon.
• D
o not use the product if you suspect tha t it is damaged.
• Do not try to open or repair the device yourself . T o
avoid considerable subsequent damage to the device,
let a qualied expert repair the device.
• Do not use any other charging cables than the one
supplied in the packaging.
• Do not use the USB output to charge y our mobile
device while the LED Light is on.
• T o char ge this pr oduct, mak e sure you use a de vice w it h
xed 5V DC output voltage (1A) to charge the light.
The light source con tained in this LED Light can only be
replaced by the manufactur er . Contact our support
department for mor e info: support@mrsa fe.eu
CHARGING THE DEVICE
The Mr Safe P ortable Pock et LED Light should be fully
charged befor e the rst use. Charging will tak e about 4
hours. Fully charged baeries will las t max. 8 hours (in
DIM mode).
T o charge the product, mak e sure that the LED Ligh t and
power bank funcon are OFF . (*) Plug the USB cable into
the charging socke t (1) on the side of the device and plug
the other side into a USB port, portable char ger , USB Wall
socket or USB Car Charging Adapter with 5V , 1A=1000mA
output (not provided).
The LED indicator (5) will turn red to indicat e tha t the
baery is being charged.
NOTE: When the baery is almost empty (<10%) the red
indicator light will s tart ashing.
(*) NOTE: Do not use the light or power bank funcon
while charging the product!
Once the baery is fully charged, the LED indic ator (5) will
turn green. Unplug the charging cable and s tore it f or later
use. Y ou can now use the Portable Pock et LED Light.
OPERA TION
1. USING THE LED LIGHT
Press the Pow er Buon (4) to turn the LED Light on
Press the Pow er Buon (4) again to DIM t o 50%
T o turn the LED Light OFF press the Power Buon (4)
for 2 seconds.
Y ou can lt the Handle (6) to direct the light into the
desired direcon.
Y ou can also mount the LED Light by using the 2
magnets built-in in the handle to aach it to any
metallic surface.
2. USING THE SOS LED FUNCTION
Press the SOS Light (3) buon to turn on the SOS
Funcon.
Press the SOS Light (3) buon ag ain to turn it o
3. USING THE POWER BANK
Insert the charging cable of the device you want to
charge into the USB Charging output (2) and insert the
other end into the device you want to charge. Y our
device will now start to charge. When the charging
is complete, remove the charging cable from both
devices and store it f or later use.
TECHNICAL SPECIFICA TIONS
Baery T ype/Capacity: Li-Ion 4000mAh
Operaon Time: Ma x. 8h
LED QTY : 1p Epistar BP Surface 16 chip SMD LED
LED Power: 10W ma x
LED Inial Flux/Lm: max. 500Lm
Beam Angle: 120°
Color T emperature: 6000K
IP Grade: IP54 r ainproof
Input Current: DC 5V 1A=1000mA max
Output current max: 1.7A~2.1A ma x 2.1A@5V DC for all
phones & tablets
Protecon: IC Protector with under/over/discharging and
NTC prot econ
SUPPORT
For more informaon, spare parts, technical quesons
and return requests concerning this product, you should
contact support@mr safe.eu.
GUARANTEE
Copyright © Mr Saf e. Mr Safe® is a regis tered tr ademark
of TE-Group NV . The Mr Safe® brand stands for superior
product quality and outstanding customer service. That
is why Mr Saf e® warran ts this product against all de fects
in material and workmanship for a period of two (2)
years fr om the date of original purchase of the pr oduct.
The condions of this guarant ee and the extent of
responsibility of Mr Saf e® under this guarantee can be
downloaded from our websit e: www .mrsaf e.eu.
QRG/MrSafe PPL-210/06-2018/V01
Copyright©Mr Safe
USER MANUAL
DFR NL GB
DECLARA TION OF CONFORMITY
ILLUS TRA TIONS
GB NL
Mr . Safe P ortable Pock et LED Light Zie aeelding
1. USB-oplaadingang
2. USB-oplaaduitgang
3. SOS-licht
4. Power & Dim-knop
5. LED-indicator
6. Handvat
7. Epistar BP Surf ace 16 chip SMD LED
INLEIDING
Uw Mr . Safe P ortable Pock et LED Light is een draagbare
10W w erklamp met powerbank-funce die zorg t v oor licht
en kracht, waar dat ook nodig is. He t is een veelzijdige
lichtoplossing voor meer dere toepassingen:
- Voor klusjes in en rond het huis, kantoor , magazijn, enz ...
- A
ls een “noodlich t ” (bijv .: jdens kamperen, stroomuitval,
jdens het rijden) met SOS-knipperende funce
Het hee ook een ingebouwde 4000mAh-pow erbank met
een USB-uitgang van 2,1A om uw apparaten onderw eg op
te laden.
VEILIGHEIDSINSTRUCTIES
• Schijn de LED niet rechtstr eeks in de ogen.
• Nauwleend toe zicht is noodz akelijk wanneer het
product in de buurt van kinderen wordt gebruikt. Sta
niet toe dat het pr oduct als speelgoed wordt gebruikt.
• Wanneer he t product niet in gebruik is, bewaar he t
op
een koele plaats om de levensduur van de baerij te
verlengen. Laad het idealiter 1-2 uur vóór het opslaan op.
• Dompel het product niet onder in wa ter , het product
is IP54 regendicht.
• De Portable P ocke t LED Light kan buitenshuis wor den
gebruikt, maar u moet extreme temperatur en of
zware r egenbuien vermijden, omdat dit de baerij kan
beschadigen.
• Bed
ek het apparaat niet jdens gebruik, z org voor venla
e.
• Gebruik het product niet als u vermoedt dat het
beschadigd is.
• Probeer het apparaat niet zelf te openen of te
reparer en. Laat een gekwaliceerde expert het
apparaat r epareren om aanzienlijk e schade aan het
apparaat t e voorkomen.
• Gebruik geen andere oplaadk abels dan die wordt
meegelever d in de verpakking.
• Gebruik de USB-uitgang niet om uw mobiele appar aat
op te laden terwijl het LED-lampje br andt.
• Om dit product op te laden, moet u een appar aat met
een vast e 5V DC-uitgangsspanning (1A) gebruiken om
het licht op te laden.
De lichtbron in deze LED Light kan alleen worden
vervangen door de fabrikan t. Neem contact op met onze
supportaf deling voor meer info: support@mr safe.eu
HET APP ARAA T OPLADEN
De Mr Safe P ortable Pock et LED Light moet voor het eerste
gebruik v olledig worden opgeladen. He t opladen duurt
ongeveer 4 uur . Volledig opgeladen baerijen gaan max.
8 uur (in DIM-modus).
Om het product op te laden, c ontroleert u of de LED-
lampjes en de powerbank -funce UIT zijn. (*)
Sluit de USB-kabel aan op de laadbus (1) aan de zijkant
van het appar aat en st eek de andere kant in een USB-
poort, draagbare oplader , USB-wandcon tactdoos of USB-
auto-oplaadadapter met 5V , 1A = 1000mA-uitvoer (niet
meegelever d).
De LED-indicator (5) wordt rood om aan te geven dat de
baerij wor dt opgeladen.
OPMERKING: W anneer de baerij bijna leeg is (<10%),
begint het rode indica elampje te knipperen.
(*) OPMERKING: Gebruik de licht- of powerbank-funce
niet jdens het opladen van het pr oduct!
Zodra de baerij volledig is opg eladen, wordt de LED-
indicator (5) gr oen.
Ontk oppel de laadkabel en be waar dez e voor later gebruik.
U kunt nu het P ortable Pock et LED-licht gebruik en.
WERKING
1. HET LED-LICHT GEBRUIKEN
Druk op de aan / uit-knop (4) om het LED-lampje in te
schakelen. Druk opnieuw op de aan / uit-knop (4) om
naar DIM te gaan t ot 50%
Om de LED-lamp UIT te schakelen, drukt u gedurende 2
seconden op de aan / uit-knop (4).
U kunt de hendel (6) kantelen om het licht in de
gewenst e richng te richten.
U kunt de LED-lamp ook monteren met behulp van de
2 magneten ingebouwd in de handgreep om deze aan
een metalen oppervlak te beves gen.
2. GEBRUIK VAN DE SOS-LEDFUNCTIE
Druk op de knop SOS Light (3) om de SOS-funce in te
schakelen. Druk nogmaals op de knop SOS Light (3) om
deze uit t e schakelen
3. DE POWER BANK GEBRUIKEN
Steek de laadkabel van het appar aat dat u wilt opladen
in de USB Charging-uitg ang (2) en steek het andere
uiteinde in het apparaa t dat u wilt opladen. Uw
apparaat begint nu op t e laden. Wanneer het opladen
is voltooid, verwijdert u de oplaadkabel van beide
apparat en en bergt u dez e op voor later gebruik.
TECHNISCHE SPECIFICA TIES
Baerijtype / Capaciteit: Li-Ion 4000mAh
Werk jd: Max. 8h
LED QTY : 1p Epistar BP Surface 16 chip SMD LED
LED-vermogen: max. 10W
LED Iniële ux / Lm: max. 500lm
Stralingshoek: 120 °
Kleurtempera tuur: 6000K
IP-klasse: IP54 r egenbestendig
Ingangsstr oom: DC 5V 1A = 1000mA max
Uitgangsstr oom max: 1.7A ~ 2.1A max 2.1A@5V DC voor
alle telef oons en tablets
Bescherming: IC Protector met onder / o ver / ontlading en
NTC-bescherming
SUPPORT
V oor meer informa e, technische vr agen of ret ouraanvr agen
met betrekking tot dit pr oduct dient u rechts treeks cont act
op te nemen met support@mrsa fe.eu.
GARANTIE
Copyright © Mr Saf e®. Mr Safe® is een gedeponeer d
handelsmerk van TE-Group NV . Het merk Mr Safe® staat
voor producten van superieur e kw aliteit en een uitstekende
klantenservice. Daar om gar andeert Mr Safe® dat dit
product vrij is van materiaal- en fabric agefout en gedurende
een periode van twee (2) jaar na de oorspronk elijke
aankoopda tum van het product. De voorwaarden van deze
gar ane en de om vang van de verantwoor delijkheid van
Mr Safe® onder deze garan e kunt u downloaden vanaf de
website: www .mrsafe .eu.
5
4
3
2
1
6
7
Hereby , Par la présente,
Company /
Entreprise:
Address: /
Adresse:
declare that the following equipmen t: / déclare que le disposif suivant :
Product name:
Nom du produit:
Product type:
Type de produit:
conforms with the following sa fety requiremen ts of the direcves 2014/30/
EU, EC/1907/2006 & 2011/65/EU . Conformity is guarant eed by the CE-
symbol. This product has been tes ted against following s tandards and
specicaons, applying versions valid in June 2018. The full text of the EU
declaraon of c onformity is a vailable at the f ollowing internet addr ess:
hp://www .mrsafe.be/DOC_PPL-210.
est c onforme aux exigences de sécurité suivantes des direcves 2014/30/
EU, EC/1907/2006 & 2011/65/EU. La conformité est garane par le symbole
CE. Ce produit a été testé par rapport aux normes et spécicaons suivantes,
appliquant les versions valides en Juin 2018. Le te xte complet de la déclaraon
UE de c onformité est disponible à l’ adresse internet suivante: hp://www .
mrsafe.be/DOC_PPL-210.
EN 55015:2013+A1:2015, EN 55035:2017,
EN 61547:2009, EN 61000-4-2:2009,
EN 61000-4-3:2006+A1:2008+A2:2010,
EN 55032:2015, IEC62321-3-1:2013
S. Izaks, Product & R esearch Manager
Authorized Signature, K apellen - June 2018
Kapelsestr aat 61, 2950 Kapellen,
mr Safe PPL-210
Portable P ocket LED Ligh t & Power Bank
TE-Group NV