Bedienungsanleitung MT Logic BTHF009 DFP (Seite 7 von 8) (Englisch)

601746

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Status Operation

LED Indicator &

Sound

LCD Display

Switch to/

from waiting

call

Redial last

number

Voice dial

Mute

microphone

Adjust

Volume

Privacy call

Disconnect

with mobile

Low battery

Charging

completed

During a call, when another call

dials in:

1.Reject the incoming call if no

any operation in 8 seconds.

2.Reject the incoming call if

double click Multifunction Key.

3.To receive the incoming call

and end the active call, click

Multifunction Key once.

4.To switch to the incoming call,

press & hold Multifunction Key

for 2 seconds. To switch back,

press & hold for 2 seconds

again.

In standby mode, press Multi-

function Key twice.

In standby mode, press Multi-

function Key once.

During a call, click together '+'

and '-' buttons once. Click again

for un-mute.

Click '+' or '-' button to control the

volume up or down.

Connect external headphone to

headphone port.

Press & hold '+' for 2 seconds.

To reconnect to phone, click

Multifunction Key once.

Connect to charger

Within 3 hours

'do' sound

A tone from the hands-

free indicates the phone

is ready to receive voice

tag.

'do' sound. (You can still

hear the other side.)

Red & Blue ﬂ ashes and

'do' sound

Constantly red on

Stops red

Caller number

Call Hold

Redial

Voice Call

Dialing

MUTE MIC /

UNMUTE MIC

VOL

BLUETOOTH

Low Battery

Charging

BLUETOOTH

Connect / Reconnect to phone

After the handsfree is switched on, it is in idle mode. It is waiting to be paired or connnected by

mobile phone. The LED indicator ﬂ ashes blue every 5 seconds indicates this mode. When the

handsfree and the device are disconnected, the handsfree will return back to idle mode.

To connect with phone

EITHER

To connect with paired phone or reconnect with previously connected phone, click Multifunction

Key once. The handsfree will search and connect to the phone nearby automatically. (The LED

indicator ﬂ ashes blue every second indicates the searching mode. The searching may last for

1/2 minute. If no phone can be found, the handsfree will return to idle mode.)

To connect with the handsfree through the phone, in the setting menu of the phone, select

‘HF009’ from ‘Paired Device’. Select ‘connect’ and the phone will connect to the handsfree.

Handsfree Functions

Receive call

Reject call

End call

Switch to/from waiting call

(call waiting)

When handsfree is ringing, the LCD displays the calling number.

Press Multifunction Key once to receive the call and ‘Active Call’

will be displayed.

When handsfree is ringing, the LCD displays the calling number.

Press Multifunction Key twice to reject the call and ‘BLUETOOTH’

will be displayed.

During a call, press Multifunction Key once. LCD displays

‘BLUETOOTH’.

When a second call dials in during the call, the LCD displays the

second calling number.

1. Reject the incoming call if no any operation in 8 seconds.

2. Reject the incoming call if double click Multifunction Key.

3. To receive the incoming call and end the active call, click

Multifunction Key once.

4. To switch to the incoming call, press & hold Multifunction Key

for 2 seconds. LCD displays 'Call Hold'. To switch back, press

& hold for 2 seconds again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MT Logic BTHF009 DFP Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info