Bedienungsanleitung MT Logic CL-1489MT (Seite 4 von 12) (Englisch, Holländisch)

523724

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Instruction Manual

SETTING TIME, 12/24HR TIME

AND THE SNOOZE DURATION

1. Press SET once, the hour digits flash. Press or to set the current hour

(hold to advance rapidly).

2. Press SET again, the minute digits flash. Press

or to set minutes.

3. Press SET again, the display shows “24Hr” and flashes, Press

or to select

“12Hr” or “24Hr” time format.

4. Press SET again, the display shows “05” and flashes, Press

or to select

your snooze time from 5 to 60 minutes.

5. Press SET again or if no key pressed for approx. 10 seconds to exit the setting

mode.

Note: when 12-hour time format is selected, the P (PM) icon will appear on the

lower middle time display to indicate the afternoon time; there is no AM indicator.

SETTING THE ALARMS

1. Press AL 1.2 once, the A1 icon and the hour digits flash. Press or to set

the alarm 1 hour.

2. Press AL 1.2 again to adjust minutes. Press

or to set the alarm 1 minutes.

3. Press AL 1.2 again, LED displays “OFF” (alarm off). To select wake to sound

sources, press

or to select :-

rd = wake-by-radio

bu = wake-by-buzzer

OFF = alarm off

4. Press AL 1.2 again, the A2 icon and the hour digits flash. Press or to set

the alarm 2 hour. Repeat step 2) and 3) to set alarm 2.

5. Press AL1.2 again or no button around 10 seconds to exit alarm setting mode.

When wake-to-radio or wake-to-buzzer is selected, the related alarm is turned on,

indicated by apperance of the A1 and / or the A2 icon on the left side of the display.

6. Press AL1.2 again or if no key pressed for approx. 10 seconds to exit the alarm

setting mode.

STOPPING AND RESETTING THE ALARM

TO COME ON THE NEXT DAY

When alarm 1 or 2 is sounding, the related A1 or A2 icon flashes. Press the AL 1.2

once to stop the alarm and reset it to come on the following day. After that A1 or

A2 icon keep lighting up on the display.

Note: When alarm is sounding, press thes

/ NAP or RADIO / SLEEP will activate

the nap timer or the radio and stop the alarm for the day.

SNOOZE OPERATION (default snooze duration is 5 minutes)

When alarm is sounding, presses

once, the alarm will be silenced and

come on again after the set snooze duration.

Note: if your second alarm activates while the first alarm is sounding or it is in the

snooze mode, the second alarm overrides the first alarm (the first alarm is reset to

come on the next day).

USING THE HI-LO DIMMER

Press

to adjust the brightness of the LED time display. This can only be

done when the radio is off or the unit is not sounding.

USING THE NAP TIMER

The NAP Timer allows you to rest and automatically wake up in 5, 15, 30, 45, 60,75

or 90 minutes.

1. Press

/ NAP once, the display shows the nap icon and the default naptime

“05” (5 minutes).

2. Press

/ NAP again to select your desired naptime. It will exit to time display

if no button pressed for around 5 seconds.

3. The nap icon lights up when the nap timer is counting. When the nap timer

reaches 0, the alarm will sound and the nap icon will flash. Press

/ NAP

once to stop the nap alarm , the nap icon will go off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MT Logic CL-1489MT Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info