English Operating Instructions
16
Lubricant table
* Follow the notes in the engine manual as well.
Access to the engine
compartment
;EVRMRK
8LIIRKMR IERHXLI WMH I G S ZI VMR K
VIQEMRLSXJSVEXMQIEJXIVXLIIRKMRI
LEWFIIR W[ MXGLIHSJJ;SVOMRKSR
LSXTEVXWGER PIEHXSWIZIVI F YVRW
&IJSVI]SYWXEVX[SVOMRKMRXLMWEVIE
EPPS[EPPTE VXW X SG SSP J MVWX
n Park the tractor on an even, solid
surface.
n Lock the parking brake.
n Conduct all work with the engine
switched off.
Opening the bonnet
n In order to lift the engine bonnet,
look for the ratchet lever in the
border slot below the cooler
cover.
n Push the ratchet lever upwards
and keep hold of it, at the same
time tip the bonnet upwards
where the slot of the handle is.
n Open the engine bonnet
completely such that the bonnet
holding cylinder holds the bonnet
in the open position.
Removing the side covering
n Fold the tonges of the two snap
buckles upwards and turn them
such that they fit through the slots
in the side covering.
n Tip the upper part of the side
covering so far until the two
tounges at the lower border of the
covering can be pulled out of the
slots of the covering holders.
Remove the covering.
Re-attach the side coverings.
n Bring the two closure tounges
into the slots of the covering
holders.
n Tip the upper part of the covering
towards the tractor and over the
snap buckle tounges.
n In order to be able to fully lower
the covering, pull the snap buckle
tounges out a little and turn a
quarter of the way (so that they
stand vertical to the slot). Tip the
holder tounges downwards.
Engine
Observe the servicing notes
described in the engine manual.
Application Lubricant
General information
Capacity API class
Ambient
temperature
Viscosity
Engine Engine oil * approx. 4.4 l
with oil filter
CF, CF-4
or
CH-4
–30....+30 °C 5W-30
–20....+40 °C
–20....+50 °C
10W-30
10W-40
0....+30 °C 30W
Hydrostatic gear and
hydraulic system
Drive System
Fluid Plus
(hydraulic/
gear oil)
approx. 19 l
Grease nipple Grease If necessary 251H EP grease or universal lithium grease no. 2
Cooler and
adjustment
container
Anti-freeze
agent *
approx. 5 l Use high-grade long-term anti-freeze agent!
(Ethylene glycol with substances protecting against corrosion
and rust)
Coolant mix ratio:
Water and/or distilled water 50% Anti-freeze agent 50%
!
