Bedienungsanleitung Muller SC 58.08 pro (Seite 2 von 2) (Englisch)

683889

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

www.hugo-mueller.de BA HUpro GB -22989- 2014-07-V03 - ED - A3 Seite 2

Additional instruction master clock Site 2 / 2

Button function

Symbol legend

1. Automatic-Mode: To access the enter-mode

2. Enter-Mode: To revert to the beginning of the current (sub-)menu.

Power plug symbol (flashing): While the power supply is disconnected, the display shows a power plug symbol. The

time switch is then operated in the battery mode. Press

-button for 1 sec. to “wake up” the time switch.

1. Automatic-Mode: STOP = Deactivation slave-clock-line (SL)

2. Automatic-Mode: START = Activation slave-clock-line (SL)

3. Enter-Mode: To adjust the flashing digit. To scroll through a choice

DCF/GPS: The master clock receives the signal for the DCF77 time standard.

PIN: The time switch is locked; to unlock the device the PIN has to be entered.

1. To activate the time switch when operated without power supply.

2. Automatic-Mode: INFO NU (INFO SL) => Press OK [Info NU] to change the displayed

information while the device is in the Automatic-Mode.

3. Enter-Mode: To confirm the selection or the entered data.

SL stopped

The slave clocks receive no pulses from the master clock. The slave clocks are stopped. The missing pulses are stored.

After reactivation these pulses will be caught up.

SL running

Slave clocks are pulsed / clocked every minute

Exception SC53.17pro:

If you have selected minutes-line: Slave clocks are pulsed every minute

If you have selected seconds-line: Slave clocks are pulsed every second

RESET: Press all front keys for 2 seconds. The time switch is reset. The values for date

and time will be deleted and have to be re-entered. The switching program has not been

deleted!

SL adjust

Slave clocks will be adjusted till they show the time of the master clock (time correction / time synchronisation)

SL error

There is a power failure, overload or short circuit of the slave-clock-line (SL).

No pulses are sent to the slave-clock-line (SL).

Menu overview (Automatic-Mode / Enter-Mode)

DCF / GPS receiver

Summertime / Wintertime

*Menu only available for master clocks with time switch functionality. For details please see the manual of the time switch:

SC 58.17 pro (DIN rail mounting) / SC 98.47 pro ( DIN rail mounting) / SC 53.17 pro (19”-housing) / SC 93.47 pro (19”- housing)

The device can process a DCF77-type telegram. The

antenna (receiver) is not included in delivery.

Initial operation of the antenna for DCF/GPS time

NOTE SAFETY INSTRUCTION!!

DISCONNECT POWER SUPPLY!!



Connect antenna as stated (manual of antenna)



Connect power supply



DCF-Symbol flashes (approx. 3 minutes)



DCF-Symbol appears static and synchronization

succeeded

Permanent blinking of DCF-Symbol = permitted signal no

reception possible (time base is the internal quartz)

No DCF-Symbol = antenna not connected

(time base is the internal quartz)

Adjustment of the atomic clock base:

Within menu

Options

DCF

an offset to GMT is already

configured and can be adjusted! Standard: GMT+1 => CET

The daylight saving time will be adjusted automatically

according to the selected settings (

Adjustments

Summertime:

(standard European rule))

Details daylights saving time slave clocks

With 60 additional pulses of 1 h. pulse suppression of the

slave-clock-line (SL).

Factory Defaults

Within the menu Adjustments -> Factory defaults you

can reset the master clock to the state of delivery. Date,

time and switching program will be lost!

PIN-Code

Within the menu Options -> PIN-Code the device can be

locked with a 4-digit PIN-

Code. The code can be adjusted,

activated and deactivated. If you have forgotten the code

please call customer service.

Set and define slave-clock-line (SL) / Activate slave-clock-line (SL)

Exception SC 53.17 pro

The SC 53.17 pro has two slave-clock-lines!!!

Before entering the standard settings of the master clock

(see on the left)

you have to confirm or adjust following line configurations:

INFO function

During regular operation (Automatic-Mode) different informations and adjustments of master clock and slave-clock-line can be displayed by pressing .

After 1 minute the clock changes to standard display automatically!!!

SL error

is shown an info query is not possible. Please carry out corrective actions first!!!

NU = SL [slave-clock-line]

Error / Recovery system of the slave-clock-line (SL)

Failure: Slave clocks are 1 minute to late / Slave clocks are 1 minute to early

If there is a power failure, overload, short-

circuit or incorrect wiring of the

slave-clock-line as well as a power failure of the slave-clock-power-

supply “

SL error

”

is displayed!!

Recovery system:

If “

SL error

”

is displayed no pulses are sent via slave-clock-line. The

complete quantity of suppressed pulses are saved and emitted

(

SL adjust

)

after corrective actions or power resumption (

SL running

If a slave clock is poled reversely the slave clocks are 1 minute late or early!!!

Corrective action:

!!ATTENTION!! DANGER OF LIFE / RISK OF FIRE AND ELECTRIC SHOCK!!!

=> Installation and assembly of electrical equipment must be carried out only by a skilled person!!!

=> Disconnect device from power supply for wiring and installation purposes!!!



Stop slave-clock-line (SL)!! Press the -button [STOP]. „

SL stopped

“ is displayed.



Switch the corresponding wiring !!!PLEASE NOTE THE SAFETY INSTRUCTIONS!!!



Enter slave-clock-time



Activate slave-clock-line

Muller SC 58.08 pro Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Muller SC 58.08 pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info