Bedienungsanleitung Multiplex PROFIcar4000 (Seite 3 von 16) (Englisch)

30242

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

PROFI mc 4000PROFI mc 4000

Version 2.0

On the right of the second line you can assign a

switch to the input you have selected. The asterisk

shows whether the switch is ON (asterisk displayed)

or OFF (no asterisk).. Press the R button to reverse

the direction of effect of the switch (ON position for-

ward or back).

This is how it’s done:

First select the servos by pressing the b button in

„Menu 1: Adjustments“, then this menu appears:

Servos adjustments

--------------------

;PNT+SW CENTRE+LIMÄ

,TRAVEL/CURVE SLOW_

The following points have changed:

previously: in Version 2.0:

;TRAV+SW ;PNT+SW

Select No. of curve points (3, 5, 7,

9 or 13) and

assign mixer input switches (can

also be done in the

TRAVEL/CURVE menu).

,CURVE ,TRAVEL/CURVE

Adjust travel and curves for mixer

inputs.

Assign mixer input switches.

SOFT-SW_ SLOW_

Set servo-SLOW times

a. Switches, number of curve points

You reach the „PNT+SW“ menu by pressing the b

button from the „Servo adjustments“ menu. Here you

can assign switches („SW“) for mixer inputs or define

the number of curve points („PNT“) for a mixer input.

No.of points+switch

;SERVO 1:BUTTERFLY

INPUT :AILERON Ä

, 3-PNT ON _

Pressing the b button opens the field for selecting a

servo. Use the q/n buttons or the Digi-adjustor to

leaf through the options.

Pressing the x button opens the field for selecting

the input you wish to process - assuming that more

than one input influences the servo. If only one input

is available, the symbol for the x button does not

appear on the screen.

Pressing the w button opens the field for selecting a

switch. Here you can select any switch type which is

available on your PROFI mc 4000.

Pressing the g button opens the field for selecting

the number of curve points.

If you select a fixed value in this menu, there are no

curve points for you to select or adjust, so the screen

shows „OFF“ at bottom left to indicate that there is

nothing to process here.

b. Adjusting travel and/or curve

You reach the „Travel/Curve“ menu by pressing the

g button in the „Servo adjustments“ menu.

;SERVO 1:BUTTERFLY

,3:SPOILER S01*Ä

"•œ›š™˜— " 50%

" •œ›š™˜—"P: 2•

Pressing the b button opens the field for selecting a

servo. Use the q/n buttons or the Digi-adjustor to

leaf through the options.

Pressing the g button opens the field for selecting

the input you wish to process - assuming that more

than one input influences the servo. If only one input

is available, the g symbol and the name of the input

do not appear on the screen. In this case the settings

apply directly to the selected servo.

Pressing the x button opens the field for selecting a

switch. You can select any type of switch which is

available on your PROFI mc 4000. If you wish to

reverse the direction of operation of any switch in this

menu, press the y button.

'' TIP:

In this menu you can also switch off mixer inputs

temporarily. This is a very useful option, as it allows

you to check settings without being confused by other

mixer inputs. The principle of temporarily switching

inputs off is the key to testing and checking the more

complicated mixers which may have many inputs.

The w button has a special function in this menu,

and its usual symbol is therefore replaced by the spe-

cial symbol „•“ here. Pressing this button opens the

lower half of the menu: the curve area.

Now you can:

• Select a point on the curve by pressing the g or

w button. The selected point flashes.

The button g only resumes its original function,

1.e. selecting the input, when you press one of

the two top buttons (b or x).

• use the q/n buttons or the Digi-adjustor to alter

the set value for the point you have selected.

• You can „reverse“ the whole curve by pressing the

y button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex PROFIcar4000 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info