Bedienungsanleitung Multiplex ROYALevo12 (Seite 52 von 57) (Englisch)

30266

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Instructions

Page 107

17. Main menu „Timer“ AA

The ROYALevo has 5 timers. Four of them you will find in

the Timer menu A. The fifth timer records the operating

time of the transmitter, and is only shown in status dis-

play 4.

Oper.time 5.25h

After 1000 hours the timer stops.

17.1. Sub-menu „Model“

I affects active model only

Range = 1000 h (stops at the end)

Press the REV/CLR button to erase

This timer is present once in each model memory, and it

runs constantly when the transmitter is switched on.

The wide range enables you to record the operating

time of any model over an entire season.

17.2. Sub-menu „Slot“

I affects active model only

Alarm range = 3:30:00 (3 ½ hours)

Time range = 4:30:00 (4 ½ hours)

Erase: in menu only

The special feature of this timer is that it is started with

the assigned switch, but cannot be stopped again using

the same switch until the slot time has concluded.

Applications:

• Measuring the total time of a flight

• Slot time in competitions

When you open the sub-menu, you will see the follow-

ing items below the timer name (Slot, Sum or Interval)

and Exit:

Line 1: Time

This is the time which has elapsed since the timer star-

ted. If you select this field, you can erase the time with

the REV/CLR button.

Line 2: Alarm = Slot time

This is where you set and display the slot time.

Line 3: Difference

(display only)

This line shows the time which also appears in status

display 3. It is calculated as the difference between Time

and Alarm. The arrow before the difference indicates

the direction in which the indicated time is running:

' counting up

# counting down

Line 4: Switch

(display only)

This line shows the switch you are using to control the

timer (<N), and the location of the ON state (' = for-

ward). When the switch is at the selected ON position,

an asterisk '* appears after the arrow.

Alarm sequence:

• 10 seconds before the set alarm time: short beep

every second (æ)

• When the alarm time is reached: long beep (æ --- )

17.3. Timer „´´ Sum“

I affects active model only

Range = 3 h 30 min

Press REV/CLR button in status display 3

(or in menu) to erase

This timer acts cumulatively, i.e. it sums the times. Once

started, it can be stopped again using the same switch,

then re-started by operating the switch once more.

Application:

Timing motor runs using throttle control as switch

You can set up the “Sum” timer to work in two different

modes:

1. Set alarm to 0:00:00

The timer begins at zero, runs forward (count-up),

adds the time and is stopped and re-started using

the assigned switch. You can reset it to zero in sta-

tus display 3 using the REV/CLR button, or in this

menu. In this case there is no alarm.

2. Alarm not set to 0:00:00

The timer begins at the alarm time you set, runs

backward (count-down) and sounds the alarm

when the selected time has elapsed.

Alarm sequence:

• starting 5 min before the set alarm is reached:

short double beep every minute (ææ)

• 5 seconds before the set alarm time:

short double beep every second (ææ)

• When the alarm time is reached:

long double beep (æ --- æ ---)

17.4. Sub-menu „¶¶¶¶ Interval“

I affects active model only

Range = 3 h 30 min

Automatic erase at every re-start

With this timer you can call up the set interval as often

as you like.

The timer starts running at the set alarm time, runs

backward (count-down) and sounds the alarm when the

selected time has elapsed.

If the switch is at the ON position at the end of the alarm

time, the interval re-starts.

If the switch is at the OFF position at the end of the

alarm time, the timer continues to count up until the

maximum value is reached (4 h 30 min).

Alarm sequence:

• 1 second before the set alarm time:

short triple beep (ææ æ)

• When the alarm time is reached:

long triple beep (æ --- æ --- æ)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo12 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info