726099
40
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
Test and check item after installation
Test operation
1. Prepare for test
(1) Do not turn on the power switch before all installation is finsihed.
(2) Connect wires corectly and firmly.
(3) Open the check valve.
(4) Remove all dust.
2. Testing
(1) Turn on the power switch and press “1/0” button.
(2) Press “MODE” button select COOL,HEAT,FAN,etc to test whether it
operates mormally.
3.Emergency operation.
When the batteries fail or when the remote controller is missing,operate as
shown below.
*
On stopping you can press the “AUTO” button on cover NO.
unitl it is in “AUTO” mode.
The air conditioner select from COOL,HEAT,DRY,FAN
modes automatically.
*
On operating,press the “AUTO” button,the air conditioner will stop.
Note to the installer
Be sure to instruct the customer how to operate the system and show him/her the attached operation manual.
Items to check
Is the indoor unit fixed firmly?
Is the gas leak test finished?
Is the unit fully insulated?
Does drainage flow smoothly?
Does the power supply voltage correspond to
that shown on the nameplate
Are wiring and piping correct?
Is the unit safely grounded?
Is wiring size according to specifications?
Is something blocking the air outlet or intake
of either the indoor or outdoor units?
Have records of refrigerant piping length and
additional refrigerant charge been made?
If not properly done,what is likely to happen
The unit may drop,vibrate or make noise.
It may result in insufficient cooling.
Condensate water may drip.
Condensate water may drip.
The unit may malfunction or the components burn
out.
The unit may malfunction or the components burn
out.
Risk of electric leakage.
The unit may malfunction or the components burn
out.
It may result insufficient cooling.
Volume of refrigerant charge in the system is not
clear.
Check
Note
The “TEST” button on the cover No. is specially for testing the air conditioner.
When pressing it,the air conditioner will be forced to operate or stop.Do not press
it when air conditioner is in normal operation.
For the following items,take special care during construction and check after installation is finished.
Test and check item after installation
38
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für MundoClima MUCS-18C wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info