Bedienungsanleitung Muse M-32 (Seite 1 von 2) (Englisch)

500103

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

AUX IN

1. Plug one end of cable (not included)

into the AUX IN socket (15) on the unit.

2. Plug the other end of the cable into the

Headphone or Line Out socket of the

external source.

GB - 2

POWER SUPPLY

2. The remote control unit operates on 2pcs

“AAA/UM4” battery (excluded). To

power up the remote control, open the

battery door, install the battery

according to the polarity diagram on the

battery compartment, then close the

battery door.

Before throwing any batteries away, consult your distributor who may be able

to take them back for specific recycling.

Important note

If an abnormal display indication or an operating problem occurs, disconnect the AC

power cord. Wait at least 5 seconds, then reconnect the AC power cord.

3. Press the STOP / FUNCTION button (20) on the unit or the FUNCTION button

(H1) on the remote control to select Auxiliary function. “AUX” indicator shows on

the display.

1. This micro system operates on AC230V~50Hz line power supply.

An external (auxiliary) audio source (i.e., personal CD player or MP3 player) can be

connected to this unit and heard through the speakers.

Installing Battery

Insert 2 “AAA/ UM4” batteries to the remote control prior to use. Make sure to match

their polarities (+/-) to the markings inside the compartment.

NOTES:

- In order to avoid leakage, always remove the batteries when unit will not be used for

a long period of time.

- If the remote control is not going to be used for a long time, remove the battery to

avoid damage caused by battery leakage corrosion. -

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type.

Track number “01” ,“CD”& the symbol “ ” will be shown during

normal compact disc playback.

Track number “001”,“CD”, the symbol “ ” & “MP3”will be shown during MP3 playback.

Track number “001”,“MP3”, the symbol “ ” & “USB” will be shown during USB

playback.

During Repeat 1

mode, display shows

During Repeat all

mode, display shows

During Random mode,

display shows

FOR NORMAL COMPACT

DISC PLAYBACK

To: PRESS:

Stop play

Pause play once

Resume play after pause again

Scan forward and backward and hold /

Skip tracks /

Repeat current track PLAY MODE once

Repeat all tracks PLAY MODE twice

Random play PLAY MODE three times

DISC ERROR

Note: If the disc is dirty, damaged or unreadable, or if the disc is placed upside down,

the “ ” indicator will appear on the display. If this occurs, clean the disc, insert the

disc correctly, or try another disc.

REPEAT, REPEAT FOLDER AND RANDOM PLAYBACK

Press PLAY MODE button (12) during unit ON mode.

CD plays with a single track repeat, all tracks repeat or

randomly.

FOR MP3/USB PLAYBACK

During Repeat 1

mode, display shows

During Repeat folder

mode,display shows

During Repeat all

mode, display shows

During Random mode,

display shows

RANDOM

GB -5

M-32CM

MICRO SYSTEM CD/MP3/USB

User Manual

Please read the instruction carefully

before operating the unit.

English

GB - 1

LOCATION OF CONTROLS

REMOTE CONTROL

STANDBY BUTTON

PLAY/PAUSE BUTTON

F - SKIP BUTTON

+ 10 TRACK BUTTON

FOLDER UP BUTTON

PLAY MODE BUTTTON

MUTE BUTTON

VOLUME BUTTON

SPEAKER

POWER / STANDBY BUTTON

CD DOOR

REMOTE SENSOR

LCD DISPLAY

USB PORT

CD OPEN / CLOSE BUTTON

FM STEREO LED INDICATOR

PLAY / PAUSE BUTTON

VOL + BUTTON

F - SKIP / UP BUTTON

PLAY MODE BUTTON

FOLDER UP BUTTON

PROGRAM / CLOCK - ADJ.

BUTTON

AUX. IN JACK

PHONES JACK

BAND BUTTON

B - SKIP / DN BUTTON

VOL - BUTTON

STOP / CLEAR / FUNCTION

BUTTON

TUNING CONTROL

SPEAKER CORD

LEFT SPEAKER JACK

AC POWER CORD

RIGHT SPEAKER JACK

FM WIRE ANTENNA

FUNCTION BUTTON

STOP BUTTON

B - SKIP BUTTON

- 10 TRACK BUTTON

FOLDER DOWN BUTTON

PROGRAM/CLOCK-ADJ

BUTTON

BAND BUTTON

VOLUME BUTTON

H1.

H2.

H3.

H4.

H5.

H6.

H7.

H8.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

H9.

H10.

H11.

H12.

H13.

H14.

H15.

H16.

Press MUTE button (H15) to on/off mute function.

Note: The mute on is cancelled when:

a. The power is off/on

b. The Volume is adjusted by the VOL +/- button.

USING HEADPHONES (Headphones Not Included)

Connect a set of stereo headphones with 3.5mm mini plug to the phone jack on the

bottom panel. The speakers are automatically cut off when headphones are in use.

Note: To establish a safe headphones sound level:

Start your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and clearly, and without

distortion.

1. The player is on/off by pressing STANDBY (2/H9) button.

2. The function is selected cyclically by pressing

STOP / CLEAR / FUNCTION button:

CD USB TUNER AUX

Press STANDBY button (2/H9) to turn on the unit,

then press VOLUME +/- control (10/H16, 19/H8)

to adjust the sound to comfortable level. The vol-

ume level will show on display for a few seconds.

GB - 3

AUDIO CONTROL

ADJUSTING THE SOUND

In full power, the continuous listening of the player may damage the user’s

hearing.

MUTE

To cut off the sound from the speakers temporarily, press the MUTE button (H15).

The Volume level icon flash on the LCD display (5). Press the MUTE button again to

cancel Mute mode and restore the sound from the speakers.

NOTE: When standby light is lit, unit is in OFF (standby) mode.

TO ADJUST THE VOLUME

VOLUME

VOL -

VOL +

1. Press STANDBY button (2/H9).

2. Press the STOP / FUNCTION button to select CD.

3. Open the CD door(3) by pushing the CD door Open button (7).

4. Place the CD with label side up inside the CD compartment

and close the CD door (3).

5. After a few seconds, the total number of tracks and total

playing time will appear on the Multifunction display (5).

Press button (9/H10) to start playing the CD.

6. Press the PLAY/PAUSE button.

1. Turn on the unit by pressing STANDBY

button (2/H9).

2. Press the STOP (20/H2) /FUNCTION

(20/H1) button to select the tuner.

3. Press the BAND button (17/H7) to select desired band.

4. Tune to the desired radio station by using TUNING knob (21) and frequency is displayed.

5. Adjust the sound.

The clock is displayed on LCD display at standby mode.

1. Press the PROGRAM / CLOCK-ADJ.

button (14/H6).

2. Press the F-SKIP/UP (11/H11) or

B-SKIP /DOWN (18/H3) to select 12 hours

or 24 hours display.

3. Press the PROGRAM / CLOCK-ADJ. button

(14/H6), the hour digit flash.

4. Press the F-SKIP/UP (11/H11) or B-SKIP/DOWN

(18/H3) to adjust hour digit.

5. Press the PROGRAM / CLOCK-ADJ. button (14/H6), the minute digit flash.

6. Press the F-SKIP/UP (11/H11) or B-SKIP/DOWN (18/H3) to adjust

minute digit.

7. Press the PROGRAM / CLOCK-ADJ. button (14/H6) again, the correct time is

shown on display.

CLOCK SETTING

LISTENING TO THE RADIO

COMPACT DISC OPERATION

GB - 4

ANTENNA

For FM reception fully unwind the external FM wire antenna and adjust direction, for

optimum reception.

AFTER LISTENING

Turn off the unit by pressing STANDBY button (2/H9).

ＨＸ－２７０６　ＩＢ　ＭＵＳＥ　００１　ＲＥＶ０　ＧＢ．Ｐ６５ 2009-6-15, 10:271

Muse M-32 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info