774208
4
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
6 7
INSTALLING THE CO2 CYLINDER
CHANGING THE CO2 CYLINDER
Usage tip: A used CO2 cylinder can be refilled by your Mysoda dealer. Return the empty
cylinder so that you only pay for the gas refill.
After the CO2 cylinder is empty, replace the CO2 cylinder in the same way as the first time you installed the
cylinder.
1. Remove the water bottle by pulling the
bottle and carbonation nozzle towards
yourself, and then unscrew it (one
quarter clockwise).
3. Unscrew the black thread
protective cap on the top part of the
device body.
4. Remove the seal and cap from the
CO2 cylinder.
2. Uninstall the top part of
the device body by turning it
anti-clockwise.
5. Install the CO2 cylinder by
screwing it clockwise. Attach the
cylinder firmly enough, but do not
tighten too much.
6. Carefully insert the CO2 cylinder
and top part together to the bottom
part. Turn the top part clockwise until
it clicks into place.
Usage tip: Buy another CO2 cylinder in your home so that you can replace it as soon as
you run out of gas. Extra cylinders are available from Mysoda dealers.
HOW TO MAKE SPARKLING WATER
3. Push the carbonation button 2–3 times,
stop when you hear a hissing sound. 4. Pull the bottle towards yourself to release pressure
inside the bottle.
6. Enjoy your carbonated water or add desired
flavour.
5. Release the bottle by turning it by one
quarter clockwise.
1. Fill the water bottle with cold water up to the
fill line. 2. To insert the water bottle, make sure that the device
is in a fully upright position and the bottle quick-lock is
angled forward. Then insert the bottle in quick-lock and
turn one quarter anti-clockwise to lock. Push the bottle
towards the device to a vertical position.
NOTE: Only use compatible CO2 cylinders and Mysoda water bottles. Never carbonate if
the bottle is empty, not fully inserted with water or if water is above the fill line.
1
2
1
2
12
EN
1
2
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mysoda Ruby wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info