493508
8
Zoom out
Zoom in
Vorherige Seite
1/13
Nächste Seite
1 DISC INPUT: Input for additional line level input signals such as CD,
Mini Disc player or the output signal from a step-up amplier for a
turntable. Use a twin RCA-to-RCA lead to connect the auxiliary units left
and right Audio Outputs” to this input.
NOTE
If an external Media Player is connected to the front MP socket (using
a 3.5mm stereo plug) while listening to a DISC line-level source, the
external Media Player will be directly selected with the DISC line-level
source immediately disconnected.
2 CD INPUT: Input for a CD or other line-level signal source. Use a twin
RCA-to-RCA lead to connect the CD players left and right Audio
Outputs” to this input.
3 VIDEO INPUT: Input for the audio signal from a stereo VCR (or stereo
TV/Satellite/Cable receiver) or other line-level audio source. Using twin
RCA-to-RCA leads, connect to the left and right Audio Outputs” of the
unit to these inputs.
NOTE
These are audio inputs only.
4 AUX INPUT: Input for additional line level input signals such as another
CD player. Use a twin RCA-to-RCA lead to connect the auxiliary units
left and right Audio Outputs to this input.
5 TUNER INPUT: Input for a tuner or other line-level signal source. Use
a twin RCA-to-RCA lead to connect the tuner left and right Audio
Outputs” to this input.
6 TAPE IN/OUT: Connections for analog recording and playback to an
audio tape recorder of any type. Using twin RCA-to-RCA leads, connect
to the left and right Audio Output of the tape machine to the TAPE IN
sockets for playback. Connect the left and right Audio Input” of the tape
machine to the TAPE OUT sockets for recording.
TO MAKE A RECORDING
When any source is selected, its signal is also fed directly to any tape
machine connected to the TAPE OUT for recording.
7 SPEAKERS: Connect the right speaker to the terminals marked “R +”
and “R-” ensuring that the “R+” is connected to the “+” terminal on your
loudspeaker and the “R-” is connected to the loudspeakers “-” terminal.
Connect the terminals marked “L+” and “L-” to the left speaker in the
same way.
Always use heavy duty (16 gauge; 1.5mm, or thicker) stranded wire to
connect loudspeakers to your C 316BEE. The high-current binding post
terminals can be used as a screw terminal for cables terminating in
spade or pin sockets or for cables with bare wire ends.
The C 316BEE is designed to produce optimum sound quality when
connected to speakers with impedances within its operating range.
Please make sure that all the speakers are rated 4 ohms minimum per
speaker.
8 AC POWER CORD : Connect AC power cord only to the prescribed AC
Outlet, i.e., 120V 60 Hz or 230V 50 Hz.
9 POWER SWITCH: The POWER switch supplies the master AC mains
power for the C 316BEE. When this switch is at ON position, the
C 316BEE is in standby mode as shown by the amber status condition of
the standby LED. Toggle the front panels STANDBY button to switch ON
the C 316BEE or back to standby mode. Switch o the POWER switch
if you intend not to use the C 316BEE for long periods of time (such as
when on vacation). It is not possible to switch ON the C 316BEE using
the front panel STANDBY button or AMP 1 remote control’s [ON] button
if the rear panel POWER switch is switched o.
IDENTIFICATION OF CONTROLS
REAR PANEL
ATTENTION!
Please make sure that the C 316BEE is powered o or unplugged before making any connections. It is also advisable to power down or unplug all
associated components while making or breaking any signal or AC power connections.
1 432 5 6 9
7 8
8
ENGLISH FRAAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für NAD C 316 BEE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von NAD C 316 BEE

NAD C 316 BEE Bedienungsanleitung - Deutsch - 12 seiten

NAD C 316 BEE Bedienungsanleitung - Holländisch - 12 seiten

NAD C 316 BEE Bedienungsanleitung - Französisch - 12 seiten

NAD C 316 BEE Bedienungsanleitung - Italienisch - 12 seiten

NAD C 316 BEE Bedienungsanleitung - Spanisch - 12 seiten

NAD C 316 BEE Bedienungsanleitung - Schwedisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info