Bedienungsanleitung NAD C 375 BEE (Seite 13 von 18) (Englisch)

493505

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

CD PLAYER CONTROL (for use with compatible NAD CD Player): Set the DEVICE SELECTOR

to “CD” in order to gain access to these buttons. Some of the control buttons below are applicable

only to specic NAD CD Player models; check the owner’s manual of your NAD CD Player for control

button compatibility. You can also load the applicable NAD code library to this device so that it can be

made compatible with your other NAD equipment. Refer to the section below about “USING THE SR 8

REMOTE CONTROL LIBRARY” on how to load a NAD code library.

SCAN [ ]: Fast reverse/forward search.

[ ] : Open or close disc tray.

[ ] : Stop playback.

[ ] : Pause playback temporarily.

[ ] : Go to next track/le.

[ ] : Go to beginning of current track/le or to previous track/le.

[ ]: Start playback.

[ ]: Select through folder list/Select through WMA/MP3 les.

ENTER: Select desired folder or WMA/MP3 le.

DISP: Show playback time and other display information.

RAND: Play tracks/les in random order.

RPT: Repeat track, le or whole disc.

PROG: Enter or exit program mode.

CLEAR: Delete track or le number from the program list.

CD: Select CD as the active source.

USB: Select USB as the active source.

OPT: Select optical input as the active source.

SRC: Select desired SRC mode.

TUNER CONTROL (for use with compatible NAD Receiver, AM/FM/DB Tuner): Set the DEVICE

SELECTOR to “TUN” in order to gain access to these buttons. Refer to the corresponding labels printed

in the remote control faceplate and their respective assigned buttons to make use of these functions.

Some of the control buttons below are applicable only to specic NAD Receiver or Tuner models;

check the owner’s manual of your NAD Receiver or Tuner for control button compatibility. You can also

load the applicable NAD code library to this device so that it can be made compatible with your other

NAD equipment. Refer to the section below about “USING THE SR 8 REMOTE CONTROL LIBRARY” on

how to load a NAD code library.

AUTO TUNE: Automatically scan all available local DAB broadcasts.

TUNE [ ] or [ ]: Tune forward or backwards.

PRESET [ ] or [ ]: Step up or down Preset numbers.

AM/FM/DB: Select XM, DAB, FM or AM band as applicable.

TUNER MODE: Activate “FM Mute On” or “FM Mute O” at FM mode. In combination with [ ],

select through applicable XM or DAB menu options.

BLEND: Engage or disengage BLEND feature.

MEMORY: Save current station into a preset number.

DELETE: Delete selected preset number or all preset numbers.

[ ]: In combination with TUNER MODE or other compatible buttons, select through applicable

XM or DAB menu options.

ENTER: Select Preset or Tune mode at AM/FM band. Display signal strength at DAB mode.

INFO: Show display information as supplied by the currently tuned RDS station, XM channel or

DAB broadcast.

IDENTIFICATION OF CONTROLS

SR 8 REMOTE CONTROL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD C 375 BEE Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD C 375 BEE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info