Bedienungsanleitung NAD C 725 BEE (Seite 6 von 24) (Englisch)

493509

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

INTRODUCTION

GETTING STARTED

UNPACKING AND SETUP

WHAT’S IN THE BOX

Packed with your C 725BEE you will nd:

• The SR 8 remote control with 2 (two) AAA batteries

• ZR 5 zone remote control with 3V CR2025 battery

• This owner’s manual

SAVE THE PACKAGING

Please save the box and all of the packaging in which your C 725BEE

arrived. Should you move or otherwise need to transport your C 725BEE,

this is by far the safest container in which to do so. We’ve seen too many

otherwise perfect components damaged in transit for lack of a proper

shipping carton, so please: Save that box!

CHOOSING A LOCATION

Choose a location that is well ventilated (with at least several inches to

both sides and behind), and that will provide a clear line of sight, within

23 feet/7 meters, between the C 725BEE’s front panel and your primary

listening/viewing position - this will ensure reliable infrared remote control

communications. The C 725BEE generates a modest amount of heat, but

nothing that should trouble adjacent components.

NOTES ON INSTALLATION

Your C 725BEE should be placed on a rm, level surface. Avoid placing the

unit in direct sunlight or near sources of heat and damp. Allow adequate

ventilation. Do not place the unit on a soft surface like a carpet. Do not

place it in an enclosed position such a bookcase or cabinet that may

impede the air-ow through the ventilation slots.

Make sure the unit is switched o before making any connections.

The RCA sockets on your C 725BEE are color coded for convenience. Red

and white are Right and Left audio respectively.

Use high quality leads and sockets for optimum performance and reliability.

Ensure that leads and sockets are not damaged in any way and all sockets

are rmly pushed home.

For best performance, use quality speaker leads of 16 gauge (1.5mm)

thickness or more.

If you intend not to use the C 725BEE for long periods of time, switch OFF

the rear panel POWER switch.

Should water get into your C 725BEE, shut o the power to the unit and

disconnect the plug from the AC wall outlet. Have the unit inspected by a

qualied service technician before attempting to use it again.

DO NOT REMOVE THE COVER; THERE ARE NO USERSERVICEABLE

PARTS INSIDE.

Use a dry soft cloth to clean the unit. If necessary, lightly dampen the cloth

with soapy water. Do not use solutions containing benzol or other volatile

agents.

ABOUT THE C 725BEE

Though the C 725BEE is among the most technically sophisticated Stereo

Receivers, we worked hard to make it one of the most musically transparent

components available as well. This is what we mean by NAD’s “Music First”

design philosophy. Here are just a few examples

• The C 725BEE uses NAD’s proprietary Power Drive™ amplier technology

for all channels to preserve accurate, linear reproduction regardless of the

loudspeaker. This uniquely ecient power-supply topology provides the

real-world benets of high dynamic power that remains uncompromised

by low-impedance speakers. By adding a second high-voltage rail to our

well regulated high-current power supply, we get an “overdrive” that can

nearly double the continuous power on a short term dynamic power basis.

The result is dynamic, detailed,”un-receiver-like” sound in stereo mode.

NAD’s exclusive Soft Clipping™ circuitry further enhances sound quality and

dynamic potential.

• High-performance components used throughout the receiver’s analog

audio circuits to maximize quality from all sources.

• Preamp output and main-amp input jacks make potential expansion as

exible as possible.

• A Second set of Speaker terminals (Speakers B) for remote listening.

• An RS-232 port for advanced zone control and software update through

a Windows® compatible PC.

• Gold-surfaced connectors are employed throughout to ensure

maximum signal integrity.

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD C 725 BEE Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD C 725 BEE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info