602907
7
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
1 FM ANTENNA TERMINAL
Connect the supplied wire dipole” FM antenna to the FM antenna
terminal using the supplied “balun” adapter. It will usually work best
when mounted on a vertical surface such as a wall, with arms fully
outstretched forming a horizontal T perpendicular to the origin
point of the signal.
AM ANTENNA TERMINAL
The AM loop antenna supplied with the C 446 (or a suitable
replacement) is required for AM reception.
Connect the supplied AM loop antenna to these terminals. If an
external AM antenna is used, make connections to the AM and GND
terminals in accordance with the instructions supplied with the
antenna.
Testing dierent positions for the antenna may improve reception;
vertical orientation will usually produce the best results. Antenna
proximity to large metal objects (appliances, radiators) may impair
reception, as well as attempts to lengthen the wire to the loop.
Refer also to the item about ASSEMBLING THE LOOP ANTENNA at
the LISTENING TO AM/FM RADIO section of the OPERATION page.
2 DAB ANTENNA TERMINAL (230V version model only)
Install the supplied DAB antenna into this DAB terminal.
With DAB, you can receive CD-like quality programs without any
annoying interference and signal distortion.
Refer also to the “LISTENING TO DAB RADIO” segment of the
“OPERATION” section.
3 AUDIO OUT
Connect to the corresponding analog audio input of an amplier,
receiver or stereo system.
4 DIGITAL OUT
Using an optical cable (TOSLINK connector), connect DIGITAL OUT to
the corresponding digital audio input of receivers or digital processors.
5 LOCAL AREA NETWORK (LAN) PORT
LAN connection must be setup for Wired connection to be
established. Set up a Wired Ethernet broadband router with
broadband internet connection.
Using a standard straight-through Ethernet cable (not supplied),
connect one end of the Ethernet cable to the LAN port of your wired
Ethernet broadband router and the other end to C 446’s LAN port.
NOTES
NADisnotresponsibleforanymalfunctionoftheC446and/orthe
internetconnectionduetocommunicationerrorsormalfunctions
associatedwithyourbroadbandinternetconnectionorotherconnected
equipment.ContactyourInternetServiceProvider(ISP)forassistanceor
theservicebureauofyourotherequipment.
ContactyourISPforpolicies,charges,contentrestrictions,service
limitations,bandwidth,repairandotherrelatedissuespertinentto
internetconnectivity.
6 WIRELESS (WIFI) ANTENNA TERMINAL
Install the supplied wireless antenna into this wireless antenna
terminal (WiFi).
Wireless (WiFi) broadband router with broadband internet
connection is required for wireless connection to be established.
7 RS 232
NAD is a certied partner of AMX and Crestron and fully supports
these external devices. Check out the NAD website for information
about AMX and Crestron compatibility with NAD. See your NAD audio
specialist for more information.
Connect this interface using RS-232 serial cable (not supplied) to
any Windows compatible PC to allow remote control of the C 446
via compatible external controllers.
8 MP DOCK
The C 446 is equipped with a data port in the rear panel where an
optional NAD IPD (NAD IPD Dock for iPod) 1, NAD IPD 2 and later
variants can be plugged in.
Connect the “MP DOCK (DATA PORT)” jack of the C 446 to the
corresponding “DATA PORT socket of the optional NAD IPD model.
Connection between the C 446 and NAD IPD is only via their
respective DATA PORT. NAD IPD audio and S-Video port connections
should be directed to the external device’s corresponding input
ports (assigned for NAD IPD).
NOTE
TheNADIPDDockforiPodisnotsuppliedwithyourC446.
IDENTIFICATION OF CONTROLS
REAR PANEL
© NAD C 446
FM
ANTENNA
GND AM
DAB
AUDIO OUT
DIGITAL OUT
LAN RS232
MP DOCK
+12V
TRIGGER
IN
POWER
100~240V – 50/60Hz
ON
IR IN
DATA PORT
L
R
WIFI
3 4 5 6 7 8 9 11101 2
12
ATTENTION!
PleasemakesurethattheC446ispoweredoorunpluggedfromthemainspowersourcebeforemakinganyconnections.Itisalsoadvisabletopowerdown
orunplugallassociatedcomponentswhilemakingorbreakinganysignalorACpowerconnections.
7
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

nad-c446

Suche zurücksetzen

  • Der player stellt keine Netzverbindung her Lief vorher einwandfrei,dann verschwand die verbindung,Netztwerk und Internet sind aber in funktion. Eingereicht am 3-2-2017 06:28

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für NAD C446 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von NAD C446

NAD C446 Bedienungsanleitung - Deutsch - 22 seiten

NAD C446 Bedienungsanleitung - Französisch - 22 seiten

NAD C446 Bedienungsanleitung - Italienisch - 22 seiten

NAD C446 Bedienungsanleitung - Portugiesisch - 22 seiten

NAD C446 Bedienungsanleitung - Spanisch - 22 seiten

NAD C446 Bedienungsanleitung - Schwedisch - 22 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info