Bedienungsanleitung NAD C516BEE (Seite 6 von 14) (Englisch)

577603

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

INTRODUCTION

GETTING STARTED

UNPACKING AND SETUP

WHAT’S IN THE BOX

Packed with your C 516BEE you will nd:

• An audio cable connector

• The CD 7 remote control with 2 (two) AAA batteries

• This owner’s manual

SAVE THE PACKAGING

Please save the box and all of the packaging in which your C 516BEE

arrived. Should you move or otherwise need to transport your C 516BEE,

this is by far the safest container in which to do so. We’ve seen too many

otherwise perfect components damaged in transit for lack of a proper

shipping carton, so please: Save that box!

CHOOSING A LOCATION

Choose a location that is well ventilated (with at least several inches to

both sides and behind), and that will provide a clear line of sight, within

25 feet/8 meters, between the C 516BEE’s front panel and your primary

listening/viewing position. This will ensure reliable infrared remote control

communications. The C 516BEE generates a modest amount of heat, but

nothing that should trouble adjacent components. It is perfectly possible to

stack the C 516BEE on top of other components.

NOTE ON INSTALLATION

IMPORTANT! Install the C 516BEE Compact Disc player on a level, vibration-

free surface. Severe vibration or operation in a tilted position may cause

the player to mis-track. The player may be stacked with other stereo

components, as long as there is adequate ventilation around it. If the

C 516BEE is placed in close proximity to a radio tuner (AM or FM), a VCR or

a television set, the operation of its digital circuits may produce static that

would interfere with reception of weak broadcast signals. If this occurs,

move the C 516BEE away from other devices or switch it o when viewing

or listening to broadcasts.

QUICK START

In case you simply cannot wait to experience the performance of your new

NAD C 516BEE, we provide the following “Quick Start” instructions to get

you underway.

Please make all the connections to your C 516BEE with the unit unplugged.

It is also advisable to power-down or unplug all associated components

while making or breaking any signal or AC power connections.

PLAY A CD

1 Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line

Output jacks to the corresponding CD inputs on your amplier.

2 Plug in the AC power cord.

3 Press the POWER button to turn ON the player.

4 Press [OPEN/CLOSE] to open the disc drawer.

5 Place a CD, label side up, in the tray’s circular recess. Be certain that the

disc is centered within the recess.

6 Press [PLAY]. The drawer closes automatically, and the disc begins to

play.

7 At any time you may press [SKIP or ] to select dierent tracks on

the disc.

8 Press [PAUSE] if you want to stop play temporarily while keeping the

pickup at its current position on the disc. Press [PAUSE] again or [PLAY]

when you want to resume playback. Press STOP if you want to end play

and reset the pickup to the beginning of the disc.

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD C516BEE Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD C516BEE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info