Bedienungsanleitung NAD c542 (Seite 6 von 44) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

161474

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

9. RANDOM

Engaging the Random Play mode will play all the tracks once on

the CD in a random order. From Stop, press first the RANDOM and

then the PLAY/PAUSE button to engage Random Play mode. During

normal playback the Random Play mode can also be engaged by

pressing the RANDOM button. The current track will stop playing

and the first randomly selected track will commence.

The Random Play mode can be used in combination with the

Repeat Play All mode but not with Program Play mode. When the

C 542 is in Random mode “RANDOM” will be shown in the Display

Panel. Press the RANDOM button again to cancel Random Play

mode and return to normal Play mode. Random Play mode can

also be disengaged by pressing the STOP button twice. On the first

press of the STOP button, playback will stop, the second press will

disengage Random Play mode.

10. SCAN

The SCAN button causes the optical pickup to scan backward

through the recording at high speed. This button works only while

the player is in PLAY or PAUSE. After a STOP command, or after

loading a new disc, you must press PLAY before the scan circuit

will work. If Scan is initiated while the player is in PAUSE the scan

is silent; if initiated during PLAY the music will be heard in

fragmentary form at reduced volume as the player scans through

it. For the first approximately 50 seconds of a track, scanning will

be at around 3 times the speed, after which scanning speed

increases to around 15 times faster than normal playing speed.

Use this “audible scan” to cue the player precisely to the spot

where you want to resume play. If you scan back to the beginning

of the disc while playing Track 1, the player automatically reverts

to normal playback.

The SCAN button causes the optical pickup to scan rapidly

forward through the music. The behaviour of this function is

similar to SCAN . If you scan forward to the end of the disc

while playing the final track, the scan will stop and the Time

display will show the table of contents. (There is no “wrap-

around” mode.)

11. SKIP

During playback, press the SKIP button once to skip back to

the beginning of the current track. Press SKIP twice in rapid

succession to skip back to the previous track or previous

programmed track in Program Play mode, once to reach the

beginning of the current track and again to jump to the previous

track. When pressing continuously, the player will skip to previous

tracks repeatedly, concluding at the beginning of the disc

(Track 1) or the first track programmed in Program Play mode.

During playback, press the SKIP once to skip to the beginning

of the next track on the disc or next programmed track in Program

Play mode. Thus, to sample each song, press PLAY and then tap

SKIP after you’ve heard a few seconds of each track. From Stop,

press the SKIP button until you’ve reached the track from

where you want to start playback. Press Play to start playback.

NUMERIC KEYPAD

Using the direct-entry numeric keypad (1 to 10; +10) causes the

player to jump directly to the beginning of a numbered track and

commence play. Thus to play Track 5, simply press 5. To play

Track 20, press: +10, 10. To play Track 36, press: +10, +10,

+10, 6.

PROGRAM

The C 542 CD player allows for programmed playback of up to 20

tracks in any desired order. To engage Program Play with your

desired track sequence in the memory:

1. Press PROGRAM. The “MEMORY” indicator will light up. The

display indicates “Pr p:01”, meaning that the player is awaiting

the first Program entry.

2. Use the SKIP or the Direct-Entry Numeric keypad buttons to

select the first track in your planned sequence. The selected

track number will blink in the display.

3. Press PROGRAM to store the selected track number in

memory. The display will revert to show Program-Entry mode

and advance to “Pr p:02”, showing that the player is ready for

your second entry.

4. Repeat Steps 2 and 3 to select and store other track numbers

in memory, up to a maximum of 20 entries. The display will

show “FULL” when 20 tracks have been entered.

5. If you want to review or edit your program entries, press

PROGRAM repeatedly to cycle the display through them. When

the highest program number is displayed, you can enter

additional tracks in the memory by repeating Steps 2 and 3.

6. To play the stored program, press PLAY.”PROGRAM” and

“MEMORY” will appear in the display, indicating that a stored

program is being played. During Program Play the SKIP

buttons will access only the tracks in the program list. So if you

want to play only a portion of a stored program, initiate play

and press SKIP to jump over the programmed tracks that

you don’t want to hear.

The Repeat Play mode can be used in combination with Program

and Random Play modes. When the C 542 is in Repeat Play mode

“REPEAT 1” or “ALL” will be shown in the Display Panel. Repeat

Play mode can also be disengaged by pressing the STOP button

twice. On the first press of the STOP button, playback will stop, the

second press will disengage Repeat Play mode.

12. STAND-BY INDICATOR

The Stand-by Indicator turns on in green when the unit is switched

on, and changes to amber when switched to stand-by mode.

REMOTE CONTROL

A wireless remote control is provided with your compact disc

player, enabling you to operate play-back functions from the

comfort of your chair or from virtually anywhere in the room. For

reliable operation there should be a clear line-of-sight path from

the remote control to the front of the CD player. If the player does

not respond to remote commands, it may be that this line-of-sight

path is obstructed by clothing, paper, or furnishings.

Most of the buttons on the remote control handset have the same

effect as the corresponding buttons on the front panel of the disc

player. In addition the handset is equipped with some extra

buttons and functions, such as the numeric keypad and Program

functions.

POWER ON

Press this Green button to switch on the power to the disc player

from Standby mode. The green LED will light up.

POWER OFF

Press this Red button to switch to Standby mode from power on

mode. The amber LED will light up. This indicates that the AC

power is still connected, and that the C 542 is ready to receive

an ON command from the remote handset or 12V trigger

(depending on the setting of the trigger switch #6).

NAD c542 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD c542

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info