577718
5
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
IDENTIFICATION OF CONTROLS
1 DIGITAL AUDIO INPUT (COAXIAL 1, COAXIAL 2, OPTICAL 1,
OPTICAL 2)
Connect to the corresponding optical or coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
2 USB
Asynchronous USB 24 bit/192 kHz input assures lowest jitter for best
musical performance.
Using Type A to Type B cable connector (not supplied), interface
computer audio to this asynchronous Type B USB input to directly
stream 24/192 PCM content from your PC or MAC.
Ensure that the Sound or Audio device setting of your computer is
set to “NAD USB Audio”.
MINIMUM PC SYSTEM REQUIREMENT
Microsoft Windows XP Service Pack 2 or higher, Microsoft Windows 7
FOR MAC USERS
Minimum Mac OS X Snow Leopard (version 10.6) and later versions
NOTE
Download and install to your PC the NAD USB Audio driver from the
Manuals/Downloads tab of the NAD web address http://nadelectronics.
com/products/digital-music/D-1050-USB-DAC.
3 SERVICE
Use for servicing purposes only. Not for consumer use.
4 5V DC IN
Connect corresponding end of the Switch Mode Power Supply
(SMPS) to the 5V DC IN of D 1050 and then connect the SMPS plug
to a mains power source.
Before connecting the SMPS plug to the mains power source,
ensure rst that the other end of the SMPS connected to the 5V DC
IN socket is rmly connected.
Always disconnect the SMPS plug from the mains power source
rst, before disconnecting from the 5V DC IN socket the other end
of the SMPS.
5 2 CHANNEL AUDIO OUT (BALANCED, UNBALANCED)
Connect to corresponding balanced and/or unbalanced audio input
of compatible devices such as receivers, ampliers, audio processors
or music system.
Audio output from 2 CHANNEL AUDIO OUT (BALANCED and
UNBALANCED) is xed.
Adjust audio level via the volume control of the device that D 1050
is hooked up.
6 o (STANDBY)
With the corresponding end of the SMPS connected to the 5V DC
IN socket of the D 1050 and the SMPS plug connected to a mains
power source, press o (Standby) to switch ON the D 1050 from
standby mode. The Standby indicator will turn from amber to
bright/white color. Pressing o (Standby) again turns the unit back
to standby mode.
7 S (SOURCE)
Toggle to cycle through the Sources (COAXIAL 1, COAXIAL 2,
OPTICAL 1, OPTICAL 2 and USB) and select desired Source.
8 VOLUME (applicable for headphone listening only)
Adjust headphone audio level by turning clockwise or
counterclockwise. This volume control does not aect the 2
CHANNEL AUDIO OUT level.
9 DISPLAY
Illuminate the selected or active Source (COAX 1, COAX 2, OPT 1,
OPT 2 or USB) and corresponding sample rate of selected audio
source (32, 44.1, 48, 96 or 192).
10 PHONES
A 3.5 mm stereo jack socket is supplied for headphone listening.
Specially designed low noise headphone circuitry can accommodate a
wide range of phones, even 600 Ohm studio models.
Adjust headphone audio level by rotating the VOLUME control
clockwise or counterclockwise.
Ensure that the volume control is turned to minimum (fully
counterclockwise) before connecting or disconnecting
headphones. Listening at high levels can damage your hearing.
When a headphone is connected to PHONES, 2 CHANNEL AUDIO
OUT is muted.
R L
2 CHANNEL
COAXIAL 2 OPTICAL1 2COAXIAL 1
DIGITAL AUDIO INPUT
SERVICE
5V DC IN
-
+
BALANCED
R L
UNBALANCED
© NAD D1050
USB
AUDIO OUT
6
7
8
1 2 3 4
5
9
10
5
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für NAD D-1050 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von NAD D-1050

NAD D-1050 Bedienungsanleitung - Deutsch - 8 seiten

NAD D-1050 Kurzanleitung - Englisch - 2 seiten

NAD D-1050 Bedienungsanleitung - Holländisch - 8 seiten

NAD D-1050 Bedienungsanleitung - Französisch - 8 seiten

NAD D-1050 Bedienungsanleitung - Schwedisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info