Bedienungsanleitung NAD M10 (Seite 3 von 14) (Englisch)

745038

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

NAD® is a trademark of NAD Electronics International.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio TV technician for help.

CAUTION

• Changes or modications to this equipment not expressly approved by NAD

Electronics for compliance could void the user’s authority to operate this

equipment.

• This device complies with Part 15 of the FCC Rules / Industry Canada licence-

exempt RSS standard(s). Operation is subject to the following two conditions:

1 This device may not cause harmful interference, and

2 This device must accept any interference received, including interference that

may cause undesired operation.

• Under Industry Canada regulations, this radio transmitter may only operate

using an antenna of a type and maximum (or lesser) gain approved for the

transmitter by Industry Canada. To reduce potential radio interference to other

users, the antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (e.i.r.p.) is not more than that necessary for successful

communication.

• To prevent electric shock, match wide blade of plug to wide slot, fully insert.

• Marking and rating plate can be found at the rear panel of the apparatus.

• To reduce the risk of re or electric shock, do not expose this apparatus to rain or

moisture. The apparatus shall not be exposed to dripping or splashing and that

no objects lled with liquids, such as vases, shall be placed on apparatus.

• Mains plug is used as disconnect device and it should remain readily operable

during intended use. In order to disconnect the apparatus from the mains

completely, the mains plug should be disconnected from the mains socket outlet

completely.

• Battery shall not be exposed to excessive heat such as sunshine, re or the like.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same

or equivalent type.

• An appliance with a protective earth terminal should be connected to a mains

outlet with a protective earth connection.

MPE REMINDER

To satisfy FCC/IC RF exposure requirements, a separation distance of 20 cm or more

should be maintained between the antenna of this device and persons during

device operation. To ensure compliance, operations at closer than this distance is not

recommended.

IF IN DOUBT CONSULT A COMPETENT ELECTRICIAN.

This product is manufactured to comply with the radio interference

requirements of EEC DIRECTIVE 2004/108/EC.

NOTES ON ENVIRONMENTAL PROTECTION

At the end of its useful life, this product must not be disposed of with

regular household waste but must be returned to a collection point for

the recycling of electrical and electronic equipment. The symbol on the

product, user’s manual and packaging point this out.

The materials can be reused in accordance with their markings.

Through re-use, recycling of raw materials, or other forms of recycling of old products,

you are making an important contribution to the protection of our environment.

Your local administrative oce can advise you of the responsible waste disposal point.

INFORMATION ABOUT COLLECTION AND DISPOSAL OF WASTE BATTERIES

DIRECTIVE 2006/66/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL

OF EUROPEAN UNION FOR EUROPEAN CUSTOMERS ONLY

Batteries bearing any of these symbols indicate that

they should be treated as “separate collection” and not

as municipal waste. It is encouraged that necessary

measures are implemented to maximize the separate

collection of waste batteries and to minimize the disposal

of batteries as mixed municipal waste.

End-users are exhorted not to dispose waste batteries

as unsorted municipal waste. In order to achieve a high

level of recycling waste batteries, discard waste batteries

separately and properly through an accessible collection

point in your vicinity. For more information about collection and recycling of waste

batteries, please contact your local municipality, your waste disposal service or the

point of sale where you purchased the items.

By ensuring compliance and conformance to proper disposal of waste batteries,

potential hazardous eects on human health is prevented and the negative impact of

batteries and waste batteries on the environment is minimized, thus contributing to

the protection, preservation and quality improvement of the environment.

IMPORTANT SAFETY INSTRUCTIONS

NAD M10 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info