Bedienungsanleitung NAD M15 HD2 (Seite 41 von 45) (Englisch)

745041

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

BATTERY INSTALLATION

Press in and lift tab to remove battery cover out from recess

Place batteries into opening. Ensure the correct polarity is observed

Press battery cover into place until it ‘clicks’ closed

SLEEP MODE

The Sleep Mode timer will switch the M15 HD to Standby mode

automatically after a preset number of minutes. Pressing the HTRM’s SLEEP

button once will display the setting of the sleep time increment. Pressing

the HTRM’s SLEEP button a second time within a 3-second period will

change the sleep time increment in 15-minute intervals, after which time

the M15 HD will automatically switch into Standby mode.

To adjust the sleep delay, press the HTRM’s SLEEP button twice; rst

to display the sleep time increment, and a second time to change the

sleep time increment. The sleep time increment and a “SLEEP” icon will

continuously display on the M15 HD’s front panel Vacuum Fluorescent

Display (VFD). Each consecutive press increases the sleep time in 15-minute

increments from 15 to 90 minutes. To cancel the sleep mode, continue

pressing the HTRM’s SLEEP button until “SLEEP OFF” displays on the VFD.

Switching the M15 HD to standby from either the HTRM’s OFF or the

M15 HD’s STANDBY button will also cancel the sleep mode

USING THE ZR 5 REMOTE CONTROL

The ZR 5 is a discrete compact remote for controlling the applicable Zone

2 features of the M15 HD. Irrespective of the main room/zone settings, the

ZR 5 allows full separate control of the Zone 2 source selection among

other applicable features.

1 ON/OFF: Switch ON/OFF the Zone feature.

2 SOURCE [ 5/6 ]: Select the active input of the NAD M15 HD that will

be sent out to the corresponding rear panel ZONE 2 output port.

3 MUTE: Temporarily switch OFF or restore the Zone Volume level.

4 VOLUME [ 5/6 ]: Increase or decrease the loudness level of selected

Zone source. This is possible only if the VOLUME setting of ZONE 2 is set

to VARIABLE.

5 PRESET [ 3/4 ]: Step up or down between stored radio presets. This

control button is possible if the selected Zone is “TUNER” and the active

tuner section has stored presets. This control button is not applicable to

M15 HD.

6 The following CD Player Zone buttons can control a compatible CD

Player. The CD Player has to be powered ON and disc loaded.

SKIP [ 9 ] : Go to the beginning of a track/le or previous track/le.

SKIP [ 0 ]: Go to the next track/le.

[ 4 ]: Start playback.

NOTE

 TheZR5remotecontrolwillonlycontrolZone2applications.Zone3

andZone4couldbeconguredandmanagedattheappropriateZone

OSDmenuusingthecorrespondingkeysontheHTRMremotecontrol.

TheHTRM’s“CUSTOM”deviceisalsodefaultedtoZone2remotecontrol

codes.

OPERATION

USING THE HTRM REMOTE CONTROL

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M15 HD2 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M15 HD2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info