Bedienungsanleitung NAD T 567 (Seite 28 von 30) (Englisch)

493500

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

REFERENCE

TROUBLESHOOTING

CONDITION POSSIBLE CAUSES POSSIBLE SOLUTIONS

No power. • The power cord is disconnected. • Plug the power cord into the wall outlet

securely.

The power is on, but the T 567 does not

work.

• No disc is inserted. • Insert a disc.

No picture. • The TV is not set to receive video input signal

from the T 567

• Select the appropriate video input mode on

the TV.

• The video cable is not connected securely. • Connect the video cable securely.

• Mismatched resolution setting between the

T 567 and the TV.

• Check TV capability.

• Set the Resolution according to your TV’s

capability.

No sound. • The connected equipment is not capable of

detecting or decoding audio signal from the

T 567.

• Connect the audio output of the T 567 to an

equipment with appropriate audio decoders.

• The power of the equipment connected with

the audio cable is turned o.

• Turn on the equipment connected with the

audio cable.

• The AUDIO output settings are incorrect. • Check audio output settings as congured in

the Audio Setup menu.

The T 567 does not start playback. • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type

and regional code.)

• The rating level is set. • Cancel the rating function or change the

rating level.

BD-Live feature does not work. • Internet connection is not established. • Ensure that the T 567 is connected to the

local area network and can access the

internet.

Shared folder or les from your PC or

media server are not displayed on the

device list.

• Firewall or anti-virus software on your PC or

media server is running.

• Turn o the rewall or anti-virus software

running in your PC or media server.

• The T 567 is not connected to the same local

area network that your PC and media server are

connected.

• Ensure that the T 567 is connected to the

same network as those of the PC or DLNA

servers where you want access to their

contents.

Blu-ray 3D disc playback does not output

3D views.

• Incorrect type of HDMI cable is used in

connecting the T 567 to the 3D-capable TV.

• Connect the T 567’s HDMI OUT to the HDMI

input of your 3D-capable TV using a Type A

High Speed HDMI cable.

• Your TV may not support HDMI 1.4 3D

mandatory format.

• Setup your T 567 with a TV that supports

HDMI 1.4 3D mandatory format.

• The “3D Mode” option in the “Display” setup

menu is set to “O”.

• Set the “3D Mode” option in the “Display”

setup menu to “On”.

The remote control does not work

properly.

• T 567 front panel is in very bright sunlight or

ambient light.

• Reduce sunlight/room lighting.

• IR transmitter window on remote or IR receiver

window is obstructed.

• Check IR windows and ensure clear line-of-

sight from remote to T 567.

• The remote control batteries are dead. • Replace the remote control batteries.

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 567 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 567

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info