42
GB
SYMPTOMS AND CORRECTION
Check the following guide for the possible cause of a problem before contacting service.
BEFORE CALLING SERVICE PERSONNEL
Reference
SYMPTOM CAUSE CORRECTION
No power. • The power cord is disconnected • Plug the power cord into the wall outlet securely.
The power is on, but the DVD player does not
work.
• No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD
indicator in the DVD display is lit.)
No picture • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the
TV so the picture from the DVD player appears
on the TV screen.
• The video cable is not connected securely. • Connect the video cable into the jacks securely.
• The connected TV power is turned off. • Turn on the TV.
No sound • The equipment connected with the audio cable
is not set to receive DVD signal output.
• Select the correct input mode of the audio
receiver so you can listen to the sound from the
DVD player.
• The audio cables are not connected securely. • Connect the audio cable into the jacks securely.
• The power of the equipment connected with the
audio cable is turned off.
•Turn on the equipment connected with the
audio cable.
• The Digital Audio Output is set to the wrong
position.
• Set the Digital Audio Output to the correct
position, then turn on the DVD player again by
pressing the POWER button.
The playback picture is poor • The disc is dirty. • Clean the disc.
The DVD player does not start playback • No disc is inserted. • Insert a disc.(Check that the DVD, or audio CD
indicator in the DVD display is lit.)
• An unplayable disc is inserted. • Insert a playable disc. (Check the disc type, color
system and Regional code.)
• The disc is placed upside down. • Place the disc with the playback side down.
• The disc is not placed within the guide. • Place the disc on the disc tray correctly inside the
guide.
• The disc is dirty. • Clean the disc.
•A menu is on the TV screen. • Press the SETUP button to turn off the menu
screen.
• The Rating level is set. • Cancel the Rating function or change the rating
level.
The remote control does not work properly. • The remote control is not pointed at the remote
sensor of the DVD player.
• Point the remote control at the remote sensor of
the DVD player.
• The remote control is too far from the DVD
player.
• Operate the remote control within about 23 ft
(7m).
• There is an obstacle in the path of the remote
control and the DVD player.
• Remove the obstacle.
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
