Bedienungsanleitung NAD T 775 (Seite 42 von 46) (Englisch)

602917

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

CHECKING CODE-LIBRARY NUMBER

You can check the current code-library on any Device Selector key as follows. Enter Library Mode by

simultaneously pressing-and-holding for 3 seconds both the desired component’s Device Selector

key and the [AVPS] key, until the Learn LED turns green. Press the [DISP] key; the HTR 3 indicates the

current code-library by ashing its [CUSTOM], [VCR], and [MACRO] keys.

For example, to indicate code-library #501, the HTR 3 will ash [CUSTOM] 5 times, pause, and then ash

[MACRO] once. You might wish to make a note of your components’ code-library numbers.

SUMMARY OF THE HTR 3 MODES

Mode Keys To Press (for 3 seconds)

Learn/Copy/Punch Through Device Key + RES Key

Delete Mode Device Key + RTN Key

Macro Record Macro Key + Function Key

Library Mode Device Key + AVPS Key

Back Light Timeout DISP Key + Digit Key

Factory Reset See “Factory Reset” above

SLEEP MODE

The Sleep Mode timer will switch the T 775 to Standby mode automatically after a preset number of

minutes. Pressing the HTR-3’s SLEEP button once will display the setting of the sleep time increment.

Pressing the HTR-3’s SLEEP button a second time within a 3-second period will change the sleep time

increment in 15-minute intervals, after which time the T 775 will automatically switch into Standby mode.

To adjust the sleep delay, press the HTR-3’s SLEEP button twice; rst to display the sleep time

increment, and a second time to change the sleep time increment. The sleep time increment and a

“SLEEP” icon will continuously display on the T 775’s front panel Vacuum Fluorescent Display (VFD).

Each consecutive press increases the sleep time in 15-minute increments from 15 to 90 minutes. To

cancel the sleep mode, continue pressing the HTR-3’sSLEEP button until “SLEEP OFF” displays on the

VFD. Switching the T 775 to standby from either the HTR-3’s OFF or the T 775’s STANDBY button will

also cancel the sleep mode

USING THE ZR 4 REMOTE CONTROL

The ZR 4 remote control is a discrete compact remote for controlling the T 775 from various rooms

other than the main room. The ZR 4 remote allows full separate control of the source selection

irrespective to the main room. This means the zone input may be completely dierent, audio and

video, from the main input and thus corresponding volume levels as well.

If one wishes to enjoy the same source as the main room, the ZR 4 remote has a [LOCAL] button to

allow simultaneous listening, but with full separate volume levels.

To mute the Zone Volume level, press ‘MUTE’ on the ZR 4. If the ‘Zone Controls’ OSD menu is ON, the

Zone ‘Volume’ level section will display ‘Mute.’

The T 775’s front uorescent display will show activity of the zone control so that main room occupants

are aware of the zone remote activity. Furthermore if there is no main room activity, only the zone

indicator will be active in the T 775’s uorescent display.

NOTE

 TheZR4remotecontrolwillonlycontrolZone2applications.Zone3andZone4couldbe

conguredandmanagedattheappropriateZoneOSDmenuusingthefrontpanelnavigations

keysaswellasthecorrespondingkeysontheHTR3remotecontrol.TheHTR3’s‘CUSTOM’deviceis

alsodefaultedtoZone2remotecontrolcodes.

OPERATION

USING THE HTR 3 REMOTE CONTROL

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 775 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 775

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info