Bedienungsanleitung NAD Viso 1 (Seite 5 von 12) (Englisch)

493484

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

IDENTIFICATION OF CONTROLS

1 STANDBY BUTTON

• Toggle this button to set the VISO 1 AP to standby mode or switch

ON the VISO 1 AP from standby mode.

• The VISO 1 AP can also be switched ON from standby mode by

pressing any of the panel keys S, M, + or - .

• When VISO 1 AP is switched ON from standby mode, the last Source

used will be selected.

NOTE

The Standby (ON/OFF) button will not shut down the VISO 1 AP.

Disconnect the mains power plug from the mains power source to

completely shut down the VISO 1 AP.

2 USB

• Allow direct connection and charging of Apple’s iPhone, iPad and

iPod touch using applicable connector (not supplied).

• VISO 1 AP may need a software update to be in step with the latest

technology trends. Connect to this input a USB memory stick

containing the software update.

• Only authorized NAD distributors or service centers are allowed to

implement a software update.

• Check with your authorized NAD distributors for future software

updates.

3 LAN

LAN connection must be setup for wired connection to be established.

Set up a Wired Ethernet broadband router with broadband internet

connection. Your router or home network should have a built-in DHCP

server to consummate the connection.

• Connect the VISO 1 AP to a network by directly connecting one

end of an Ethernet cable to the LAN port of your wired Ethernet

broadband router and the other end to VISO 1 AP’s LAN port. Use a

standard straight-through Ethernet cable (not supplied).

NOTE

AirPlay lets you stream music from your AirPlay-enabled device to the

VISO 1 AP. The AirPlay-enabled device and the VISO 1 AP must be in the

same network to send and receive streaming audio with AirPlay.

4 OPTICAL (S/PDIF) IN

• Connect OPTICAL IN of VISO 1 AP to the corresponding optical

digital output of sources such as CD, DVD or BD players, digital cable

box, digital tuners and other applicable components.

• The optical digital input is 24/96 capable.

• The optical digital input accepts PCM audio signal only. Ensure that

the digital audio output of your source is set to PCM before it is

connected to the optical digital input of VISO 1 AP.

5 AC MAINS INPUT

• The VISO 1 AP comes supplied with a separate detachable mains

power cord. There are 2 supplied power cords – select applicable

type for your usage. Before connecting the plug to the mains

powers source, connect rmly rst the other end to VISO 1 AP’s AC

Mains input socket.

• Always disconnect the mains power plug from the mains power

source rst, before disconnecting the cable from the VISO 1 AP’s AC

Mains input socket.

• Power Rating: 100 - 240V ~50/60Hz 35W.

NOTES

• Disconnect the mains power plug from the mains power source to

completely shut down the VISO 1 AP.

• The VISO 1 AP will power up to its last Source setting prior to being shut

down.

6 S, M,+/-

• Press “+” to increase the volume level; “ - ” to lower it.

• Toggle “M” to temporarily mute audio level or restore audio from

mute mode. “S” will continuously ash at mute mode.

• Pressing “+” or “ - ” will restore audio from mute mode.

• “S” indicator ashes whenever a remote control command is

received.

• Toggle “S” button to sequentially select through the following

source modes

a AirPlay/iOS/iPod nano device

b Bluetooth device

c Optical (S/PDIF) source

Below is a description of the various color modes of the S-indicator light.

S-INDICATOR LIGHT COLOR FUNCTION/DESCRIPTION

Alternately ashing in red and green

Ready to be congured

Factory default setting

Flashing green Access point/setup mode

Solid green AirPlay/iOS/iPod nano device source mode

Solid blue Bluetooth device source mode

Solid amber Optical (S/PDIF) source mode

O (no color) Standby mode

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD Viso 1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD Viso 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info