Bedienungsanleitung NAD VISO TWO (Seite 32 von 34) (Englisch)

602923

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

CONDITION POSSIBLE CAUSES POSSIBLE SOLUTIONS

No sound from all channels. • AC power unplugged. • Check AC cable connection and outlet.

• Power not switched on.

• Outlet has no power.

No sound from some channels. • Faulty/missing cables. • Check cables.

• Speaker connections faulty. • Check speaker connections.

• “Speaker Settings” channel (s) set to “O”. • Check “Speaker Settings” menu.

No sound from Subwoofer. • Subwoofer is o, not powered or improperly

connected.

• Power-up subwoofer, check Sub’s AC outlet

or check connections.

• Sub level set too low. • Correct subwoofer level by adjusting “SUB”

button at HTR 6.

VISO TWO does not respond to HTR 6

remote control.

• Batteries are at or incorrectly inserted. • Check batteries.

• IR transmitter window on remote or IR receiver

window on VISO TWO is obstructed.

• Check IR windows and ensure clear line-of-

sight from remote to VISO TWO.

• VISO TWO front panel is in very bright sunlight

or ambient light.

• Reduce sunlight/room lighting.

VISO TWO does not respond to front panel

commands or remote control.

• Microprocessor error. • Power down the VISO TWO via the front

panel Power button and unplug it from the

AC outlet.

• VISO TWO may have over heated. • Wait ve minutes, re-connect and power up.

The POWER is ON, but the internal DVD

player does not work.

• No disc is inserted. • Insert a disc.

No picture. • The TV is not set to receive video signal. • Select the appropriate video input mode

on the TV so that the picture from the

VISO TWO appears on the TV screen output.

• The video cable is not connected securely. • Connect the video cable into the jacks

securely.

• The connected TV power is turned o. • Power on the TV.

• HDMI connector is plugged-in and “HDMI Res.”

is set to 720P, 1080I or AUTO.

• Unplug HDMI cable connected to rear

panel’s HDMI OUT.

• At DVD mode and with no disc loaded (“NO

DISC”)

1 Press and hold [DISPLAY] button. The lower

line of the VFD will show the current HDMI

resolution setting.

2 Use the remote’s [ ] keys or toggle

[MEMORY] button to select through

480P/576P, 720P, 1080I, AUTO or OFF.

Select either “480P/576P” or “OFF” to enable

component video out, composite and S-Video

output. Stop at your desired resolution setting

and release [ ] keys or [MEMORY] button.

The playback picture is poor. • The disc is dirty. • Clean the disc.

The internal DVD player does not start

playback.

• No disc is inserted. • Insert a disc

• An unplayable disc is inserted. • Insert a playable disc (Check the disc type

colour system and Regional code).

• The disc is placed upside down. • Place the disc with the playback side down.

• The disc is not placed within the guide. • Place the disc correctly inside the guide on

the disc tray.

• A menu is on the TV screen. • Press SETUP button of HTR 6 to turn o the

menu screen.

• The disc is dirty. • Clean the disc.

Parental Control cannot be changed. • The password entered was wrong. • Enter the correct password.

• Password was forgotten. • Set the VISO TWO to factory default settings.

1 Place the VISO TWO into AM mode.

2 Press quickly the three front panel buttons;

[PLAY/PAUSE] then [STOP] then [DISPLAY],

holding the [DISPLAY] button for more than

7 seconds. The VISO TWO will switch itself

o then back on to DVD mode.

Note: Default password is 2580.

REFERENCE

TROUBLESHOOTING

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD VISO TWO Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO TWO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info