707511
5
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
1.0 INSTALL ATION
The following Section 1 paragraphs refer to both the NAC S1 preamplifier and NAP S1
power amplifiers.
1.1 POSITIONING
WARNING. Statement amplifiers are extremely heavy and to minimise the risk of damage or
personal injury they should be lifted and moved by at least three people working together.
Your Statement preamplifier and power amplifiers can generally be positioned in your listening
room as convenience dictates. There are however some constraints to consider:
For best performance Statement amplifiers should ideally be connected directly
to wall-mounted mains outlet sockets using only the supplied PowerLine mains cables.
Each Statement unit must therefore be located within 1m of a mains outlet socket.
If a NAC S1 preamplifier is to be used with a Nim 500 Series or Classic Series power amplifier
(most likely a NAP 500 or NAP 300), the distance between the NAC S1 and the power amplifier
will be constrained by the 1m interconnect cable length.
If a NAC S1 preamplifier is to be used with NAP S1 power amplifiers, the distance between
the preamplifier and power amplifiers is less constrained by interconnect cable length.
The supplied interconnect cables are 560mm long, however cables of up to 10m length may
be used. Your Nim retailer will be able to supply cables made-up to the required length.
NOTE. One of each pair of NAP S1 power amplifiers is nominated as the “left” power amplifier and
one nominated as the “right” power amplifier. Left (L) and right (R) identification can be found on NAP S1
connection panels. Ensure when positioning a pair of NAP S1 power amplifiers that each one is sited
appropriately for connection to its left and right inputs and outputs.
IMPORTANT NOTE. The NAC S1 has setup buttons and indicators located on its connection
panel. Ensure the connection panel is accessible following installation to enable configuration.
8 9
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Naim NAP S1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Naim NAP S1

Naim NAP S1 Bedienungsanleitung - Deutsch - 38 seiten

Naim NAP S1 Bedienungsanleitung - Französisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info