Bedienungsanleitung Naim UnitiQute 2 (Seite 3 von 22) (Englisch)

707489

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

UnitiQute 2 Introduction

1 UnitiQute 2 Introduction

UnitiQute 2 is a highly capable product that will repay time and effort spent on installation

and setup. We strongly recommend that you read this manual. UnitiQute 2 effectively

incorporates four separate elements. Each of these is introduced in the following

paragraphs and subsequently described in full detail in Sections 5 to 8. The UnitiQute 2

elements are:

An Integrated Stereo Amplifier Introduced below and fully described in Section 5

A Multi-mode Radio Introduced below and fully described in Section 6

A UPnP™ Audio Interface Introduced below and fully described in Section 7

A USB/iPod Interface Introduced below and fully described in Section 8

Prior to the sections describing the UnitiQute 2 elements, Section 2 covers its installation

and connection, Section 3 describes its operation and Section 4 describes its setup.

1.1 The Integrated Amplifier

1.1.1 Inputs

UnitiQute 2 incorporates an audio preamplifier that

provides two analogue and four S/PDIF digital audio

external inputs. The preamplifier also accepts internal

inputs from the UnitiQute 2 integrated FM/DAB tuner.

In addition to conventional analogue and digital input

signals, the UnitiQute 2 preamplifier can accommodate

the following external peripheral inputs:

• iPodandUSBstorageviaaUSBinterface.

• Internetradioanduniversalplugandplay(UPnP™)

servers via an Ethernet network socket or wireless

network connection.

1.1.2 Signal Outputs

The UnitiQute 2 preamplifier provides the following signal

outputs:

• AnS/PDIFdigitalaudiooutput

(pre volume/balance control).

• Apreamplifieroutput(postvolume/balancecontrol).

• Aheadphoneoutput(postvolume/balancecontrol).

1.1.3 Speaker Outputs

UnitiQute 2 incorporates a stereo power amplifier rated at

30 Watts per channel into 8 Ohms. The power amplifier is

designed to drive one pair of speakers via the sockets on

the UnitiQute 2 rear panel.

1.2 The Multi-mode Radio

The UnitiQute 2 multi-mode radio combines an FM/DAB

(Digital Audio Broadcasting) tuner and an internet radio

(iRadio) player. A total of 40 radio stations across all three

modes can be stored as presets. In FM and DAB mode

stations are tuned by UnitiQute 2 scanning the respective

transmission bands. In iRadio mode UnitiQute 2 receives

data streams and a list of available radio stations from

a dedicated internet server. iRadio requires broadband

internet access via a home network connection.

The UnitiQute 2 DAB module incorporates full broadcast

and station display capabilities. The FM module is fully RDS

(Radio Data System) capable.

Note: DAB and RDS broadcasts are not available in all

territories.

1.3 The UPnP™ Audio Interface

UnitiQute 2 can connect to a home network and play

audio files stored on UPnP™ servers.

1.4 The USB/iPod Interface

UnitiQute 2 incorporates a front panel USB interface socket

that enables audio files stored on USB memory sticks and

Apple iPod models to be selected and played. UnitiQute

2 is Apple compatible with the iPod and iPhone models

illustrated below.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim UnitiQute 2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim UnitiQute 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info