Bedienungsanleitung Nautilus R686 (Seite 40 von 42) (Englisch)

737237

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Condition/Problem Things to Check Solution

No display/partial display/

unit will not turn on

Checkelectrical(wall)

outlet

Make sure unit is plugged into a functioning wall outlet.

Check connection at front

of unit

Connection should be secure and undamaged. Replace

adapter or connection at unit if either are damaged.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or

cut, replace cable.

Check data cable

onnections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or other-

wise damaged. Replace Console if damaged.

Console Display IfConsoleonlyhaspartialdisplayandallconnectionsarene,

replace the Console.

If the above steps do not resolve the problem, contact your

local distributor for further assistance.

Unit operates but Contact

HR not displayed

HR cable connection at

Console

Be sure cable is connected securely to Console.

HRcableboxconnection Be sure cables from handlebars and cable to Console are

secure and undamaged.

Sensor grip Be sure hands are centered on HR sensors. Hands must be

kept still with relatively equal pressure applied to each side.

Dry or calloused hands Sensorsmayhavedifcultywithdriedoutorcallousedhands.

Aconductiveelectrodecream(heartratecream)canhelp

make better conduct. These are available on the web or at

medicalorsomelargertnessstores.

Static Handlebar If tests reveal no other issues, Static Handlebar should be

replaced.

Unit operates but

Telemetric HR not

displayed

ChestStrap(optional) Strap should be “POLAR®” compatible and uncoded. Make

sure strap is directly against skin and contact area is wet.

CheckUserProle SelecttheEditUserProleoptionfortheUserProle.Goto

theWIRELESSHRsettingandmakesurethatthecurrent

value is set to ON.

Interference Trymovingunitawayfromsourcesofinterference(TV,Micro-

wave,etc).

Replace Chest Strap If interference is eliminated and HR does not function, replace

strap.

Replace Console If HR still does not function, replace Console.

Unit operates but

Telemetric HR displayed

incorrectly

Interference Make sure that the HR receiver is not blocked by a personal

electronic device in the left side of the media tray.

No speed/RPM reading,

Console displays “Please

Pedal” error code

Check data cable integrity All wires in cable should be intact. If any are cut or crimped,

replace cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly.

Small latch on connector should line up and snap into place.

TROUBLESHOOTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nautilus R686 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info