Bedienungsanleitung Nedis ACMB2WT9 (Seite 4 von 32) (Alle Sprachen)

726102

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Quick start guide

Mobile air conditioner ACMB2WT9

For more information see the extended manual

online: ned.is/acmb2wt9

Intended use

The product is exclusively intended as a mobile air conditioner for

domestic, indoor use.

Any modication of the product may have consequences for safety,

warranty and proper functioning.

Main parts (image A)



Control panel



Swing louvers



Power cable storage



Manual drainage outlet



Continuous drainage outlet



Air outlet



Power cable



Exhaust hose



Exhaust nozzle



Exhaust hose connector



Window kit



Remote control



Window kit adjustment

screws



Exhaust nozzle screw

Safety instructions

WARNING

• Thoroughly read all warnings.

• This user manual is addressed to the end user. Read this

information carefully before installing or using the product.

• Only use the product as described in this manual.

• This product can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

product in a safe way and understand the hazards involved.

Children shall not play with the product. Cleaning and user

maintenance shall not be done by children without supervision.

• Close supervision is necessary when the product is used by or

near children, animals or inrm persons. Do not allow children to

play with it or touch it.

• Keep the product out of reach from children.

• Do not use a damaged or defective product, but return it for

repair or replacement.

• Do not expose the product to water, rain, moisture or high

humidity.

• If the product is immersed in water, do not touch the product or

the water.

• Shut o the main power grid and carefully remove the plug from

the power outlet.

• After the product has been immersed or covered in water or

other liquids, do not use the product again.

• Keep the product away from heat sources. Do not place the

product on hot surfaces or near open ames.

• Do not use the product near explosive or ammable materials.

• Do not insert any objects into the product.

• Do not obstruct or cover the product’s air inlet or outlet grid.

• Always disconnect the product from the power outlet when

cleaning or moving the product.

• Do not pull the power cable to move the product.

• This product may only be serviced by a qualied technician for

maintenance to reduce the risk of electric shock.

• Disconnect the product from the power outlet and other

equipment if problems occur.

• Turn o the main power switch before unplugging the power

cord.

• Do not use the product when the cord or plug is damaged.

• Make sure that the electrical supply in your area matches a

voltage of 220 – 240 VAC and a frequency of 50 Hz.

• Connect to a grounded socket only.

• If necessary, use an earthed extension cable of a suitable

diameter.

• Fully extend the power cord and make sure the power cord does

not contact the product.

• When using an extension cord, use one which is as short as

possible and fully extended.

• Do not use external timers or remote control systems to switch

the product on or o.

• Ensure people do not trip over the cord.

• Make sure that the power cable cannot become entangled and

does not hang over the edge of a worktop.

• Do not leave the product unattended when switched on.

• R290 is a refrigerant gas that complies with the European

directives on the environment.

• Be aware that refrigerants can be odorless.

• Place the product in an area without any continuous sources of

ignition (for example: open ames, gas or electrical appliances in

operation).

• Only install, operate and store the product in a room with a oor

area above 11 m

• Only store the product in a well-ventilated area.

• Store the product in such a way as to prevent mechanical failure.

• When the product is installed, operated or stored in a

non-ventilated area, make sure the room is designed to prevent

the accumulation of refrigerant leaks resulting in a risk of re or

explosion due to ignition of the refrigerant caused by electric

heaters, stoves, or other sources of ignition.

• Only persons with a current valid certicate from an

industry-accredited assessment authority, which authorizes their

competence to handle refrigerants safely in accordance with an

industry recognized assessment specication, can work on or

break into a refrigerant circuit.

• Servicing can only be performed as recommended by the

equipment manufacturer. Maintenance and repair requiring the

assistance of other skilled personnel can only be carried out

under the supervision of the person competent in the use of

ammable refrigerants.

• When defrosting and cleaning the product, do not use any

means other than those recommended by the manufacturing

company.

• Do not puncture or heat any part of the refrigerant circuit.

Installing the product

• Place the product on a at, level surface.

Only move the product in an upright position.

Leave a minimum of 0.5 m space around the air inlet and outlet

to allow a good circulation of airow.

If the product has been tilted, allow it to stand upright for 2 hours

before plugging it in.

Assembling the exhaust

Do not block the exhaust hose, this may cause overheating.

Only use the provided exhaust hose.

• See image B.

Assembling the continuous drainage (optional)

1. Open the continuous drainage outlet A

2. Connect A

to a water container or drainage system (not

included).

Nedis ACMB2WT9 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info