Bedienungsanleitung Nedis PASH120BKA4 (Seite 3 von 28) (Alle Sprachen)

726356

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Quick start guide

Paper Shredder PASH120BKA4

For more information see the extended manual

online: ned.is/pash120bka4

Intended use

The Nedis PASH120BKA4 is intended to cut up to 6 sheets of A4-size

paper into strips or ne particles at once.

This product is not intended to shred cardboard or thick paper

sheets.

This product is intended for indoor use only.

This product is not intended for use by persons (including children)

with a reduced physical, sensory or mental capabilities or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning the use of the product by a person

responsible for their safety.

Any modication of the product may have consequences for safety,

warranty and proper functioning.

Specications

Product Paper Shredder

Article number PASH120BKA4

Dimensions (l x w x h) 325 x 170 x 322 mm

Weight 3260 g

Power supply 220 - 240 VAC / 50/60 Hz

Power input 1.4 A

Power consumption 300 W

Operating cycle 2 minutes on / 60 min o

Cutting style Cross cut

Entry width 220 mm

Shred capacity 6 sheets of 80 g of paper size A4

Main parts (image A)



Control slider



Paper entry



Shredder



Carrying handle



Container



Power cable

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in

this document before you install or use the product. Keep this

document for future reference.

• Only use the product as described in this document. Any other

use may cause (serious) injuries.

• Do not use the product if a part is damaged or defective. Replace

a damaged or defective product immediately.

• Do not drop the product and avoid bumping.

• This product may only be serviced by a qualied technician for

maintenance to reduce the risk of electric shock.

• Ensure that there is sucient light when installing and using the

product.

• Position the product close to a power outlet, so the power cable

can be unplugged easily.

• Make sure the power cable is positioned in a way that prevents

tripping or falling.

• Unplug the product from the power source and other equipment

if problems occur.

• Do not unplug the charger by pulling on the cable. Always grasp

the plug and pull.

• Connect to a grounded outlet only.

• Do not let the power cable touch hot surfaces.

• Do not expose the product to direct sunlight, naked ames or

heat.

• Do not expose the product to water or moisture.

• Do not immerse the product in water or other liquids.

• Do not use the product if the surface is cracked.

• Place the product on a stable and at surface.

• Do not overll the container. Empty the container before using

the product again.

• Be careful when handling the blades.

• Keep away from the paper entry to avoid cutting injuries.

• Keep clothing, necklaces, bracelets, loose hair and any other

object that can get stuck away from the paper entry.

• Do not insert explosive materials, metal objects, or any other

foreign objects that can lead to hazardous situations.

• Before cleaning and maintenance, switch o the product and

disconnect the power.

• When the product is not in use, disconnect it and store in a safe,

dry place, out of reach from children.

• Keep the product out of reach from children, inrm persons or

animals.

• Do not let pets or children play too close to the product.

• This product is not a toy. Never allow children or pets to play with

this product.

• Children should be supervised to ensure that they do not play

with the product.

• Do not move the product during operation.

• Do not use a damaged or defective product, but return it for

repair or replacement.

Installing the product

1. Place the product on a stable and at surface.

2. Connect the power cable A

to a power outlet.

Using the product

1. Slide the control slider A

to AUTO.

Standby mode is activated.

2. Insert max. 6 A4-size sheets of paper vertically into the paper

entry A

at once.

The product detects the paper and starts shredding.

Do not hold on to the paper when it is being shredded.

After shredding, the product returns to the standby mode

automatically.

Reversing the product

When paper is jammed in the shredder A3, you can reverse the

shredder blades to remove the paper.

1. Slide A

to REV.

The product starts to reverse the running for 1 second.

1 slides to OFF.

2. Slide A

to AUTO.

3. Insert max. 6 A4-size sheets of paper vertically into A

at once.

Troubleshooting

Problem Possible cause Solution

The product is

switched on, but

the paper cannot be

shredded.

There is too much

cut paper into the

container A

5. The

paper cannot fall

down and stays at

1. Disconnect the

product.

2. Remove A

from A

3. Empty A

above a dust bin.

PASH120BKA4_MAN_COMP_0520_print_(20372 1422)_v1.0.indd 3PASH120BKA4_MAN_COMP_0520_print_(20372 1422)_v1.0.indd 3 28-5-2020 14:03:0628-5-2020 14:03:06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nedis PASH120BKA4 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info