726374
3
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
English
3
WIFISM10CWT
Smart motion detector
Description
1. Reset button
2. Status indicator
3. USB port (Micro USB)
Use
1. Download and install the app “Nedis SmartLife“ from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app “Nedis SmartLife“.
3. Create a new account or log in to your existing
account.
4. Tap “+” to add the device.
5. Select “Other products” from the list of products.
6. Take one of these actions:
(a) Use the USB cable to connect the power adapter
to the device. Insert the mains plug of the power
adapter into the wall socket.
(b) Open the battery compartment by turning the
back of the smart motion detector counterclockwise.
Install the batteries (2x CR123A, not included) into
the battery compartment. Close the battery
compartment.
7. If the status indicator does not ash: Press and hold
the reset button for 6 seconds.
If the status indicator ashes: Conrm in the app.
8. Confrm the Wi-Fi network and password.
9. Enter the device name.
Note: The device name will also be used by Amazon
Alexa and Google Home.
10. Mount the bracket to the required location.
11. Place the mart motion detector into the mounting
bracket.
12. If necessary, adjust the detector angle.
Safety
To reduce risk of electric shock, this product should
only be opened by an authorized technician when
service is required.
Disconnect the product from the mains and other
equipment if a problem should occur.
Read the manual carefully before use. Keep the
manual for future reference.
Only use the device for its intended purposes.
Do not use the device for other purposes than
described in the manual.
Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
The device is suitable for indoor use only.
Do not use the device outdoors.
Do not expose the product to water or moisture.
Cleaning and maintenance
Warning!
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
Clean the outside of the device using a soft, damp
cloth.
Support
If you need further help or have comments or
suggestions please visit www.nedis.com/support
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Nedis WIFI SM10CWT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info