Bedienungsanleitung NetBotz CCTV Adapter Pod 120 (Seite 2 von 4) (Englisch)

646447

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

NetBotz CCTV Adapter Pod 120

2 NetBotz CCTV Adapter Pod 120

Installing the CCTV Adapter Pod 120

To install your pod, simply connect your video source to the appropriate DIN, BNC, or RCA

video input jack on the pod. Then, use the USB cable to connect your pod to your NetBotz

500 or 420 appliance, or to a USB hub that is connected to the NetBotz appliance. To reduce

radio frequency noise and emissions from the USB cable, clamp one clamp-on ferrite onto

the USB cable within 2-3 inches of the end that connects to the pod, and the second clamp-on

ferrite onto the USB cable within 2-3 inches of the end that connects to your NetBotz

appliance or to the USB hub.

Configuring the CCTV Adapter Pod 120

Once you have connected your CCTV Adapter Pod and video source to your NetBotz

appliance, you will need to use the Advanced View to configure the pod.

To configure your pod:

1. Start the Advanced View and then select from the Appliance drop-box the IP address of the NetBotz

appliance to which you have connected the CCTV Adapter Pod. Be sure to log into the appliance using a

user account that has administrator privileges. Once you have logged in, confirm that the newly

connected CCTV Adapter Pod appears in the Navigation Pane. The default label for CCTV Camera Pod

120s is CCTV Video Pod serial, where serial is the serial number of the pod.

2. Select the Configuration button and then double-click on the Camera Pods icon (located in the Pod/

Sensor Settings portion of the Configuration pane).

3. Select from the Camera Pod Configuration pane the entry that corresponds to the CCTV Adapter Pod and

then click Capture.

4. The Camera Capture Settings window opens. In addition to the fields that are typically available when

using this window to configure Camera Pod 120s, one additional control is available when configuring a

CCTV Adapter Pod:

– Video Format: Used to specify the format in which video is transmitted by the video source. Available

selections include: NTSC-M, NTSC-Japan, PAL-B, PAL-D, PAL-G, PAL-H, PAL-I, PAL-M, PAL-N

Combination, and SECAM.

5. Use the controls in the Camera Capture Settings window to configure the camera and image capture

settings for use with the pod. To see an example of an image capture using the currently selected Video

Format, Brightness, Contrast, and Image Quality settings click Apply and the sample image in the

Capture window will be updated using the new values. When you are finished, click OK and any changes

you have made will be saved to the appliance.

Note

The NetBotz appliance to which the CCTV Adapter Pod will be connected must

be running BotzWare 2.1 or later, and the Advanced View interface that will be

used to configure the pod must also be 2.1 or later. Before continuing, please use

the Advanced View Upgrade task to download and install the latest available

applications from NetBotz.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NetBotz CCTV Adapter Pod 120 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info