710732
16
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
When I connect the adapter to a WiFi
network, I cannot access a shared resource
If you cannot access a shared resource such as a printer, try these troubleshooting tips:
Make sure that the WiFi router or access point is physically connected to the LAN
Ethernet network.
Make sure that the resource that you are trying to access is connected to the LAN
Ethernet network.
Make sure that the IP addresses and the networking settings in the LAN Ethernet
network are configured correctly.
How can I improve the speed of the WiFi
connection?
The connection speed can vary depending on the type of USB port on your computer,
the capacity of the WiFi router or access point for the WiFi network, and the type of
Internet connection.
For information about viewing the physical rate of the adapter’s WiFi connection see
How do I view the speed of the WiFi connection on a Windows-based computer? on
page 17 or How do I view the speed of the WiFi connection on a Mac? on page 17.
The following limits might apply to the speed of the WiFi connection:
If the physical rate is limited to 54 Mbps, the adapter might be connected to an
802.11a, 802.11b, or 802.11g network. If you want a faster physical rate, connect to
an 802.11ac or 802.11n network, if available.
If the physical rate is limited to 54 Mbps, the network security might be WPA (TKIP).
When WPA (TKIP) security mode is configured on the WiFi router or access point,
WiFi regulations allow the adapter to connect at up to 54 Mbps only. For a faster
connection, configure the security for the WiFi router or access point as WPA2 or
WPA + WPA2 mixed WiFi security. The connection speed still depends on the WiFi
capacity of the WiFi router or access point.
If your computer does not include a USB 2.0 port, the physical rate is limited to the
14 Mbps of the USB 1.1 legacy standard.
User Manual16Troubleshooting and Frequently
Asked Questions
AC1200 WiFi USB Adapter Model A6150 User Manual
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Netgear A6150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info