Bedienungsanleitung Netgear GC110P (Seite 2 von 2) (Englisch)

710804

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

February 2018

are trademarks of NETGEAR, Inc. Any non‑NETGEAR

trademarks are used for reference purposes only.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTL LTD

Building 3, University Technology Centre

Curraheen Road, Cork, Ireland

PoE Troubleshooting for Model GC110P

Here are some tips for correcting simple problems that might occur:

• Make sure that the PoE Max LED is o. The switch provides a total

power budget of 62 watts. If the PoE Max LED is solid amber,

disconnect one or more powered devices (PDs) to prevent PoE

oversubscription. Start by disconnecting the PD from the highest-

numbered port.

Note: You can manually override the amount of power that is reserved for

each PoE port and attached PD by using the Insight mobile app or the Insight

Cloud Portal.

• Check the right LED for the port on the switch that is connected to

a powered PD. The right port LED on the switch lights solid green to

indicate that PoE is being delivered to the PD. If the right port LED

lights solid amber, a PoE fault occurred.

Support

Thank you for purchasing this NETGEAR product. You can visit

www.netgear.com/support to register your product, get help, access

the latest downloads and user manuals, and join our community. We

recommend that you use only ocial NETGEAR support resources.

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français

canadien à http://downloadcenter.netgear.com/other/.

(If this product is sold in Canada, you can access this document in Canadian-French

at http://downloadcenter.netgear.com/other/.)

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before providing power to

the switch.

Conﬁgure the Switch Using the NETGEAR

Insight App

¾ To conﬁgure the switch:

1. On your iOS or Android mobile device, visit the app store, search for

NETGEAR Insight, and download the app.

2. Connect your mobile device to the WiFi network of the access point

that is connected to the switch.

For initial conﬁguration, you must use local WiFi access. Aer you

complete initial conﬁguration and discover the switch, you can use

cloud access if the switch is connected to the Internet.

3. Open the NETGEAR Insight app on your mobile device.

4. If you did not set up a NETGEAR account yet, tap CREATE NETGEAR

ACCOUNT and follow the onscreen instructions.

5. To log in to your NETGEAR account, tap LOG IN and enter your

credentials.

6. Name your network and specify a device admin password that applies

to all devices that you add to this network.

7. Tap the NEXT button.

8. To add the switch to your account, use one of the following options:

• Enter the serial number.

• Scan the serial number bar code.

• Tap Switch as the device type and follow the prompts to scan the

network or scan the QR code.

Insight

Note: You might be prompted to connect the switch to power and to

an uplink. Since you already did this (see Connect the Switch to Your

Network, on these screens, tap the NEXT button.

The NETGEAR Insight app discovers the switch and registers it on the

network that you named in Step 6.

If you are using the local WiFi access method and the app does not

discover the switch, make sure that your mobile device and the switch

are connected to the same WiFi network.

9. Select the switch to conﬁgure and manage it.

You can use the NETGEAR Insight app to access the switch later to view or

change the conﬁguration settings.

For more information about how to connect a NETGEAR Insight managed

switch to an existing network, visit https://kb.netgear.com/000044341.

Note: We do not recommend using the switch’s local browser–based management

interface to conﬁgure the switch oine. Changes made using this method are not

pushed to the cloud, so they are not reﬂected in the Insight app or the Insight Cloud

Portal, and might create conﬂicts with the Insight-managed network to which the

switch is connected. If you cannot connect your switch to a network with Internet

access, and you want to use the local-only browser interface to access the switch,

see the user manual.

To download the user manual, visit netgear.com/support/product/GC110 or

netgear.com/support/product/GC110P.

Insight

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear GC110P Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear GC110P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info