Bedienungsanleitung Netgear GS108Tv1 (Seite 2 von 2) (Englisch)

710749

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

November 2007

This symbol was placed in accordance with the European Union

Directive 2002/96 on the Waste Electrical and Electronic Equipment (the

WEEE Directive). If disposed of within the European Union, this

product should be treated and recycled in accordance with the laws of

your jurisdiction implementing the WEEE Directive.

Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their

respective holders. Information is subject to change without notice.

The Smartwizard Discovery utility finds the switch and displays its MAC

Address, IP Address, and model number. If you cannot configure your switch,

verify that the IP address configuration of the PC is in the same subnet as the

switch. If they are not on the same subnet, click Configuration Setting and

enable DHCP.

3. Click to select the line displaying the details of your switch. If there are

multiple smart switches in your network, be sure to select the one you want to

configure.

4. Click Web Access to view the switch Login screen.

5. Enter the default password of password in lower case letters and click Login.

The System > Management screen will display. Consult the Resource CD or

the on-line link to the Reference Manual by selecting Help > User Guide for

assistance with configuration procedures.

Select from the configuration menu options to configure the switch for your

network.

Troubleshooting Tips

Following are some tips to correct simple problems that might occur.

Be sure to power on your PC and smart switch in the correct sequence.

Follow this sequence. Turn off the smart switch and computer. First, turn on

the smart switch and wait two minutes. Next turn on the computer.

Make sure the Ethernet cables are securely plugged in.

For each powered on computer connected to the smart switch with a securely

plugged in Ethernet cable, the corresponding smart switch LAN port status

light will be lit.

Make sure the network settings of the computer are correct.

In most cases, computers should be configured to obtain an IP address

automatically via DHCP.

If your network uses static IP addresses, be sure the switch and computer are

configured with valid IP addresses.

Technical Support

Thank you for selecting NETGEAR products.

After completing setup and configuration, locate the serial number on the bottom

label of the Smart Switch and use it to register your product at

http://www.netgear.com/register.

Registration on the web site or over the phone is required before you can use our

telephone support service. The phone numbers for worldwide regional customer

support centers are on the Warranty and Support Information card that came with

your product.

Go to http://www.netgear.com/support for product updates and web support.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear GS108Tv1 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear GS108Tv1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info