710733
7
Zoom out
Zoom in
Vorherige Seite
1/29
Nächste Seite
Get Started and Connect to a WiFi Network
7
A7000 WiFi USB Adapter
Set Up Your Adapter
Before you begin using your adapter, set up the adapter using the resource CD that came in
the package.
Note: The adapter provides the best performance with a USB 3.0 port but is
compatible with a USB 2.0 or USB 1.1 port.
To set up your adapter:
1. Install the NETGEAR adapter software or a standalone driver for your computer.
NETGEAR offers adapter software for Windows-based and Mac computers and a
standalone driver for Windows-based computers. You must install either one version of
the software or a driver, as described in the following sections:
Install the Windows Adapter Software. The Windows adapter software allows you
to use the adapter software or a built-in Windows configuration tool to connect the
adapter to a WiFi network. For more information, see
Install the Windows Adapter
Software on page 7.
Install a Windows Standalone Driver. The Windows standalone diver allows you to
use a built-in Windows configuration tool to connect the adapter to a WiFi network.
For more information, see
Install a Windows Standalone Driver on page 8.
Install the Mac Adapter Software. The Mac adapter software allows you to use the
adapter software to connect the adapter to a WiFi network. For more information, see
Install the Mac Adapter Software on page 9.
2. Insert your adapter into your computer’s USB port.
For more information, see Insert the Adapter on page 9.
3. Join a WiFi network using the adapter software or a built-in Windows configuration tool.
For more information, see Join a WiFi Network on page 11.
Install the Adapter Software
Install the adapter software on your Windows-based or mac computer using the resource CD
that came with your adapter. If your computer does not include a CD drive, visit
netgear.com/support to download the adapter software.
Install the Windows Adapter Software
The Windows adapter software allows you to use the adapter software or a built-in Windows
configuration tool to connect the adapter to a WiFi network.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Netgear Nighthawk A7000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info