Bedienungsanleitung Netgear WN802T (Seite 2 von 2) (Englisch)

519518

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

September 2007

This symbol was placed in accordance with the European Union Directive 2002/96 on the

Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the

European Union, this product should be treated and recycled in accordance with the laws of

your jurisdiction implementing the WEEE Directive.

or registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product

names are trademarks or registered trademarks of their respective holders. Information is subject to change with-

out notice.

Now, Verify Wireless Connectivity

Using a computer with an 802.11g, 802.11b or 802.11n wireless adapter, verify

connectivity by using a browser such as Netscape®, Internet Explorer or Mozilla

Firefox® to connect to the Internet, and check for file and printer access on your network.

Note: If you cannot connect, see the Troubleshooting Tips in this guide or the link to the

NETGEAR RangeMax NEXT Wireless-N Access Point WN802T Reference Manual on the

Resource CD.

Troubleshooting Tips

Here are some tips for correcting simple problems you may have.

No lights are lit on the access point.

The access point has no power.

• Make sure the Power Supply is connected to the access point and plugged in to a

working power outlet or power strip.

• Make sure you are using the Netgear Switching Power Supply supplied with your

access point.

The Ethernet light is not lit.

There is a hardware connection problem.

• Make sure the cable connectors are securely plugged in at the access point and the

network device (hub, switch, or router).

• Make sure the connected device is turned on.

The WLAN light is not lit.

The access point’s antennas are not working.

• If the Wireless LAN activity light stays off, disconnect the adapter from its power

source and then plug it in again.

• Contact NETGEAR if the WLAN light remains off.

I cannot configure the access point from a browser.

Check these items:

• The WN802T is properly installed and it is powered on. Check that the Ethernet port

LED is green to verify that the Ethernet connection is OK.

• If your PC uses a Fixed (Static) IP address, ensure that it is using an IP Address in the

range of the WN802T. The WN802T default IP Address is 192.168.0.233 and the

default Subnet Mask is 255.255.255.0. The WN802T default setting is for a static IP

address. If the network where you are connecting it is using DHCP, configure it

accordingly. See the Reference Manual on the Resource CD for the Wireless Access

Point for more details.

Note: The factory default reset button and the default settings for your wireless-N

access point are located on the label at the rear of your WN802T.

I cannot access the Internet or the LAN with a wireless capable

computer.

There is a configuration problem. Check these items:

• You may not have restarted the computer with the wireless adapter to have TCP/IP

changes take effect. Restart the computer.

• The computer with the wireless adapter may not have the correct TCP/IP settings to

communicate with the network. Restart the computer and check that TCP/IP is set up

properly for that network. The usual setting for Windows on the Network Properties

is set to “Obtain an IP address automatically.”

• The access point’s default values may not work with your network. Check the access

point default configuration against the configuration of other devices in your network.

• For full instructions on changing the access point’s default values, consult the

documentation links on the Resource CD or on the menu of the wireless-N access

point user interface.

Technical Support

Thank you for selecting NETGEAR products.

To register your product, go to: http://www.NETGEAR.com/register

Go to http://www.NETGEAR.com/support for support information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear WN802T Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear WN802T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info