Bedienungsanleitung Netgear XAV1004 Powerline AV Ethernet Adapter (Seite 2 von 2) (Englisch)

608668

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

August 2010

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,

this product should be treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or

registered trademarks of their respective holders. Information is subject to change without notice.

LED Descriptions

• Solid. The Ethernet port is linked, but there is no activity.

• Blinking. There is traffic between an Ethernet port and the Powerline

network.

• Off. There is no Ethernet connection.

• Solid. The adapter is connected to a Powerline network.

• Fast Blinking. The adapter is sending or receiving data.

• Slow Blinking. The adapter is going into power saving mode.

• Off. The adapter has not found any other compatible Powerline devices

using the same encryption key.

• Solid. The electrical power is on.

• Blinking. The adapter is in the process of resetting, power saving mode,

or security setup.

• Off. There is no electrical power.

Security Button and Reset Button

Use Push 'N' Secure to set the security on your Powerline adapters by pressing the

Security button. For more information, see the User Manual, located on your

Resource CD, and also available at http://www.NETGEAR.com/support.

WARNING!! Do not press the Security button on the Powerline AV Adapter until

installation is complete and the adapters have established a connection with each

other. Prior to using the Security button, the Ethernet cables should be plugged in

and the connected devices powered on to prevent the adapter from going into

power saving mode, which prevents the Security button from working. Press the

Reset button for 2 seconds to return the Powerline AV Adapter to its factory default

settings.

Ethernet

Powerline

The Pick A Plug feature lets you pick the electrical outlet with the strongest

link rate, indicated by the color displayed by the LED:

Green: Link rate > 80

Mbps (Best)

Orange: Link rate > 50

and < 80 Mbps

Red: Link rate < 50

Mbps

Power

Ethernet Port Traffic Priority (QoS)

When connecting devices to your Ethernet ports, be aware of the Quality of Service

(QoS) priorities assigned for each port:

• Port 1 (dark green) has high priority, and gives uninterrupted service to the

connected device. Devices you would connect to Port 1 include media servers,

storage devices, gaming consoles, video players, or internet telephones.

• Port 2 (light green) has medium priority. You can connect devices such as

gaming consoles, video players, or internet telephones to this port.

• Ports 3 and 4 (yellow) have low priority, and are best for networking data

devices, such as printers.

Troubleshooting Tips

• Make sure the Powerline devices are plugged into outlets with

power.

• Move the Powerline device to a closer location.

• If you have set network security, make sure that all Powerline

devices are using the same encryption key.

• Reset the devices to factory default settings. Refer to the User

Manual for instructions.

• Make sure that your router and modem are on and working correctly.

• Make sure that the Ethernet cables are working and securely

plugged into the devices.

• Reset the devices to factory default settings. Refer to the User

Manual for instructions.

Power LED is off. Make sure that power is supplied to the electrical outlet, and that the

Powerline devices are not plugged into an extension cord, power strip,

or surge protector.

Powerline LED is

off.

Powerline LED is

red.

The color of the Powerline LED indicates the speed of the Powerline

link. If the LED is red, the speed is less than 40 Mbps. Switch to

another electrical outlet until the LED displays solid green.

Ethernet LED is

not blinking.

Technical Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and

use it to register your product at http://www.NETGEAR.com/register. Registration is

required before you can use the telephone support service. Registration via our

website is strongly recommended.

Go to http://kbserver.netgear.com for product updates and Web support.

For additional information about setting up, configuring, and using your Home

Theater Internet Connection Kit, see the User Manual.

For complete DoC please visit the NETGEAR EU Declarations of Conformity

website at: http://kb.netgear.com/app/answers/detail/a_id/11621/

WARNING!! Do not plug any Powerline device into a power strip.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear XAV1004 Powerline AV Ethernet Adapter Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear XAV1004 Powerline AV Ethernet Adapter

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info