nv Niko PMXXX-8800XR08171
XXX-88000 / XXX-88001
2 1 N
XXX-8800X
230V~
16A
Read the complete manual before attempting installation and activating the system.
1.
The
controls the
can
and colors.
XXX-88000:
XXX-88001:
Note: only suitable for indoor mounting!
2.
Preferably flush mount the thermostat
or near other thermal influences as lamps,
XXX-8800X
fig.1
Wiring diagram:
Connect the heating or air conditioning as follows: The
is manually selected.
1 3
2
fig.2 fig.3
3.
Parts (fig.3)
1.
2.
-
.
- :
The thermostat is switched on (switch lights) if the temperature in the room:
- drops below 12°C in heating mode.
- rises above 18°C in air conditioning mode.
-
:
The thermostat is switched on if the temperature in the room:
- drops below 15°C in heating mode.
- rises above 15°C in air conditioning mode.
3.
The thermostat is set in heating mode as a standard.
1.
and turn the control key to min. temperature (+5°C) .
2.
.
3.max. temperature (+30°) .
4.
.
5.min. temperature (+5°C) .
6.
.
The
steps,
T
Check:
Heating mode: If the room temperature is lower than the set temperature,
Air
lights.
Limiting the adjustment range:
Example:
- Remove the control key (3 ).
- Push the pin (C ) up,
- Set the min.A ) (e.g. 15°C).
- Set the max.B ) (e.g. 25°C).
- Push the pin (C ) back in place.
- Place back the control key (3 )*.
* NOTE: when
the left side between A and B !
4.
- Completely switch off the mains before starting the maintenance of your product.
- Regularly check the pressure of the screw terminals and whether there is sufficient ventilation.
- Regularly clean the cooling slots to keep them dustfree and to guarantee an optimum dissipation.
5.
- Nominal power supply:
- Output contact:
- Min.
- Recommended flush mounting height:
- 5 connection terminals,
2
or 1 x 2,5mm
2
- Ambient temperature (t
a
):
- during opera
- Adjustment range:
- Hysteresis:
- Accuracy:
- Safety class II
- Designed for use in an environment with a non-condensing atmospheric humidity (IP21).
6.
-
- This
has to
service.
- During installa
- The sta
- The sta
- This
regulations;
- The rules of proper workmanship
- In case of questions, you can consult Niko’
Support Belgium: Support UK:
+32 3 778 90 80 +44 1525877707
website : http://www
e-mail: sales@nikouk.com
In case
of your complaint (Conditions of use,
7.
- Period
product by the consumer
- The
defect.
- In case of a
charge.
- Niko cannot be held liable for a defect or damage as a result of an incorrect installation,
use or wrong usage or transformation of the goods.
-
of the consumers in the countries
distributors,
above.
