Bedienungsanleitung Nilfisk-ALTO NEPTUNE SB (Seite 6 von 25) (Englisch)

609103

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

NEPTUNE SB

Options / model variants

Original instructions

Do not make any technical modi-

fications to the high-pressure

cleaner.

Ensure that the machine is regu-

larly serviced by authorized Nil-

ﬁ sk-ALTO dealers in accordance

with the maintenace plan. Failure

to do so will void the warranty.

CAUTION!

High-pressure hoses, ﬁ ttings

and couplings are important

for the safety of the cleaner.

Use only high-pressure parts

approved by the manufacturer!

The power cord must not differ

from the version speciﬁ ed by the

manufacturer and may only be

changed by an electrician.

Please contact your local author-

ized Nilﬁ sk-ALTO equipment dis-

tributor for all other maintenance

or repair needs!

Testing

The cleaner conforms to the Ger-

man „Guidelines for Liquid Spray

Jet Devices“. The high-pressure

cleaner must be subjected to a

safety examination in accord-

ance with the „Accident Preven-

tion Regulations for Working

with Liquid Spray Jet Devices“

as required, but at least every

12 months, by an authorised

inspector.

After all repairs or modifica-

tions to electrical equipment,

the protective conductor resist-

ance, the insulation resistance

and the leakage current must

be measured. Furthermore, a

visual inspection of the mains

power cord, a voltage and current

measurement and a function test

must be carried out. Our after-

sales service technicians are

at your disposal as authorised

inspectors.

The complete „Accident Preven-

tion Regulations for Working

with Liquid Spray Jet Devices“

are available from the Carl Hey-

manns Verlag KG, Luxemburger

Strasse 449, 50939 Cologne or

from the appropriate association

of employers’ liability insurances.

The pressure-bearing parts of

this high-pressure cleaner have

been manufactured in accord-

ance with § 9 of the German

Pressure Vessels Ordinance

and successfully subjected to a

pressure test.

Bypass valve

The pressure is reduced by

means of a "bypass valve" which

returns water to the inlet side of

the pump at a minimum pressure.

The point at which this occurs is

set and sealed at the factory and

must not be adjusted.

Warning

• Inhalation of aerosols can be

hazardous to health.

• Where applicable use a de-

vice in order to avoid or re-

duce aerosols production,

e.g., a shield covering the

nozzle.

• For protection against aero-

sols use a respiratory mark

of class FFP 2 or higher.

2 Description

2.1 Purpose

This high-pressure cleaner has

been designed for professional

use. It can be used for cleaning

agricultural and construction

equipment, stables, vehicles,

rusty surfaces, etc.

The cleaner has not been ap-

proved for cleaning surfaces

which comes into contact with

food.

Chapter 5 describes the use of

the high-pressure cleaner for

various cleaning jobs.

Always use the cleaner as de-

scribed in these operating in-

structions. Any other use may

damage the cleaner or the sur-

face to be cleaned or may result

in severe injury to persons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO NEPTUNE SB Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO NEPTUNE SB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info