Bedienungsanleitung Nilfisk-ALTO Poseidon 3 (Seite 10 von 14) (Englisch)

493186

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

POSEIDON 3

10 Original Operating Instructions

Description

Purpose This high-pressure cleaner has

been designed for professional

use in

– Agriculture

– industry

– transport industry

– automotive cleaning

– municipal facilities

– cleaning trade

– construction industry

– food industry

etc.

Always use the cleaner as de-

scribed in these operating in-

structions. Any other use may

damage the cleaner or the sur-

face to be cleaned or may result

in severe injury to persons.

Operating elements 1 Spray gun

2 Mains power lead

3 Spray lance

4 Receptacle for electrical

lead

5 Detergent intake hose

6 Detergent metering knob

7 Receptacle for Spray lance

8 Supply water connection with

water inlet filter

9 High pressure hose connection

10 Main switch

11 Handle

12 Hose reel

Control / Operation

Using cleaning agents Cleaning agent can be drawn

in via the injector installed as

standard only in low-pressure

mode.

Model variants

Spray Jet Devices“. The high-

pressure cleaner must be sub-

jected to a safety examination

in accordance with the „Acci-

dent Prevention Regulations for

Working with Liquid Spray Jet

Devices (BGV A3)“ as required,

but at least every 12 months, by

an authorised inspector.

After all repairs or modifica-

tions to electrical equipment,

the protective conductor resist-

ance, the insulation resistance

and the leakage current must

be measured. Furthermore, a

visual inspection of the mains

power lead, a voltage and cur-

rent measurement and a func-

tion test must be carried out. Our

after-sales service technicians

are at your disposal as author-

ised inspectors.

The complete „Accident Preven-

tion Regulations for Working

with Liquid Spray Jet Devices“

are available from the Carl Hey-

manns Verlag KG, Luxemburger

Strasse 449, 50939 Cologne

or from the appropriate asso-

ciation of employers’ liability

insurances.w

Unloader valve

Unacceptably high pressure is

fed back without residual pres-

sure via a bypass line into the

intake line of the pump when the

safety device is tripped.

The unloader valve is set and

sealed at the factory and must

not be adjusted.

Safety devices

Locking device on spray gun:

The spray gun features a locking

device. When the pawl is acti-

vated, the spray gun cannot be

ope rated.

Thermal overcurren circuit

breaker:

A thermal current sensor pro-

tects the motor against overload-

ing. The machine will restart after

a few minutes when the thermal

sensor has cooled.

Warning

• Inhalation of aerosols can

be hazardous to health.

• Where applicable use a de-

vice in order to avoid or re-

duce aerosols production,

e.g., a shield covering the

nozzle.

• For protection against aero-

sols use a respiratory mask

of class FFP 2 or higher.

CAUTION!

Never allow cleaning agent to

dry on the surface to be cleaned.

The surface may be damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO Poseidon 3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO Poseidon 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info